What did you do to or on your Kubota today?

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
You know they are washable? I soak mine in a bucket with Dawn dish wash detergent, rinse in clear water and let air dry. beats 35 bucks for a new one.
I cleaned mine this week also. I blew it out with compressed air and it looked good enough to re-install... but reading the manual saw it was washable so I stuck it in a 5-gal bucket with Dawn and it turned the 3 gallons of soapy-water absolutely BLACK! I did it again with fresh water and it got that pretty dirty also.
Anyway, I know they say not to, but I also blew out the secondary but nothing came out of it so I reinstalled it after wiping the entire filter-box/cylinder out with a damp rag.
It’s surprising how much dirt these things capture even when you think you’re using the tractor in a non-dusty environment. Lots more air goes thru a tractor than fuel so I think its a good idea to keep up with these.
 

sparky45

Active member

Equipment
L 3301DT
Dec 5, 2018
248
51
28
SEDAN
Disk'd up some ground I plowed a few weeks ago, gitt'n ready to plant a food plot for the Quail ( hopefully they'll stop by). Sorghum Millet mix.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,134
5,194
113
Chenango County, NY
New shed is almost done. Power goes in this weekend and floor pour in a couple weeks
Dayum.....

All I got to say.....except I’m very jealous....[emoji15]


Sent from my iPhone using Tapatalk
 

BX23S

Member
Lifetime Member

Equipment
2022 Kubota L3901 FEL, BH, GRAPPLE, PALLET FORK, SNOW PLOW and Hard Canopy
Sep 1, 2018
70
41
18
ID
New shed is almost done. Power goes in this weekend and floor pour in a couple weeks

Sent from my SM-G975W using Tapatalk

Wow! Big enough to live in.:D


Any interior pics?
 
Last edited:

fj40dave

Well-known member
Lifetime Member

Equipment
B2650, LA534, BH77, TPD35, RCF2060, BB1566, RGA1258
Sep 24, 2009
421
256
63
Yelm, WA
Spread 5 yards of 3/4 minus for a concrete driveway base yesterday....
Hey....keeps us busy!!!
 

Attachments

Rosher18

Member

Equipment
L185DT (1977)
Aug 2, 2016
113
0
16
33
Salem, Oregon
Spread 31 tons of 3/4 minus to bolster up our arena parking area and start a road from there to my shop roll up door. (road will be under pile when done)


Sent from my SM-G960U using Tapatalk
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,516
2,547
113
Peoria, AZ
(road will be under pile when done)
Well thought out. I'm always amazed at the number of folks who don't do this.
 

BX23S

Member
Lifetime Member

Equipment
2022 Kubota L3901 FEL, BH, GRAPPLE, PALLET FORK, SNOW PLOW and Hard Canopy
Sep 1, 2018
70
41
18
ID
Finally received OEM oil filters, fuel filters and air filter.
Installing the engine fuel and air filters was a piece of cake, however, the rear fuel filter remains a pain in the arse, my hands are too big, as such I cannot get to the bottom hose clamp. Does anyone have an easy way to removed it? TIA!


 

fj40dave

Well-known member
Lifetime Member

Equipment
B2650, LA534, BH77, TPD35, RCF2060, BB1566, RGA1258
Sep 24, 2009
421
256
63
Yelm, WA
Spread a little gravel around today.....nothing big, but that's what we were up to today with the B2650
 

Attachments

  • Like
Reactions: 1 user

mdhughes

Well-known member
Lifetime Member

Equipment
L3901DT
Dec 10, 2014
1,250
715
113
Ste Geneveive county, MO
Did a little clearing on the private road frontage, trimmed tree limbs hanging over the road and chipped the up.

It's been a while since it has been dry enough to get the chipper out of where I store it to use it.

 

Attachments

edritchey

Well-known member
Lifetime Member

Equipment
A bunch of cute little Kubotas
Jul 19, 2014
1,106
804
113
Wellsville, PA
Did a little clearing on the private road frontage, trimmed tree limbs hanging over the road and chipped the up.

It's been a while since it has been dry enough to get the chipper out of where I store it to use it.

What chipper do you have for your tractor?
 

mdhughes

Well-known member
Lifetime Member

Equipment
L3901DT
Dec 10, 2014
1,250
715
113
Ste Geneveive county, MO
It is a WoodMaxx WM-8m. I have had it since June of 2015. It came in handy when we took out 16 trees to put our garage in. Chipped up all of the tops, had two piles that were around 4' tall and a couple smaller ones. A friend took most of the chips to use as mulch.



It weights 950 pounds, has a 24" 200 pound flywheel with 2 knives. Infeed opening is 8" x 8".

I have been very happy with the chipper.

edritchey, you will notice I got the bucket level indicator on the loader. Took me about a year to get it on the tractor.
 
Last edited:

Chilliwack Murray

Member

Equipment
B7510 with loader and BH4672 backhoe, JD400 industrial Backhoe, B6100.
Jan 8, 2019
33
23
8
BC, Canada
Built a new pad to repurpose the greenhouse as a garden shed, rotated 180 degrees and moved into its new spot.

It was over a couple days though.









 
  • Like
Reactions: 1 users

Bmyers

Well-known member
Lifetime Member

Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
May 27, 2019
3,293
3,849
113
Southern Illinois
Spent another Saturday at the farm. We got 40 acres of beans planted. Worked on clearing more around the well house and hauling brush to the pile.

Resized_20200606_090738.jpeg

Resized_20200606_120154.jpeg

Resized_20200606_120208.jpeg

Still have more work to do, but it was getting hot and was time to stop for the day.
 

Attachments