Selling Kubota Tires and Wheels- $50 each

[SonofOrange]

We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.

 

[kubotafreak]

How wide are those 18" wheels? What is the bolt pattern size? (img 3329)

 

[Comanche]

Looking for two of 420/70-24.

 

[SonofOrange]

How wide are those 18" wheels? What is the bolt pattern size? (img 3329)

They are 19 5x12.25. It looks like a 6-7/8" bolt pattern with 5-1/4'' centers.

 

[Frankr1zzo]

Where are you located

 

[SonofOrange]

Where are you located

Monroe, GA

 

[SonofOrange]

Looking for two of 420/70-24.

Sorry, I don't have anything that large. The newer 24" is a 13.6, that's 340/85 24. The other 24" ones are for older L series and a smaller tire and wheel.

 

[kubotafreak]

They are 19 5x12.25. It looks like a 6-7/8" bolt pattern with 5-1/4'' centers.

Ok thanks! Im looking for 18” seem to be a European thing…

 

[jimiddle]

We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.

We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.

Looking for a front rim for 7-16 tire. Rim would measure 6" wide X 17" diameter.

 

[SonofOrange]

Looking for a front rim for 7-16 tire. Rim would measure 6" wide X 17" diameter.

I don't have a 17x6, but I do have a 16x5 and two 16x8. The wheel overall is 17", but the tire size is 16".

 

[SimonDewing]

We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.

I am looking for a front wheel for my L245DT to replace one which has rusted out.

The 16x5 you picture above could well be it

I am away from the farm at the moment so can't go an measure it but I see from the ID on your post that you have an L245.
If its a DT any chance you can check if you have one (or maybe a pair) to fit amongst your for sale collection?

Rims are definitely 16x5 and its a 6 bolt pattern with a relatively small diameter (4 3/4 or something similar) from memory but don't quote me on that.

If you can't check against yours, can you give me the bolt pattern, center hole size and offset for this rim?.

Front tires on my tractor are 700x16 AG R1 tread.

Thanks

Simon

 

[SimonDewing]

I just found some reference pics whilst looking through my phone, bolt pattern is 4 3/4 inch and center hole is 3 1/2 inch give or take.

If your rim fits can you put my name on it and we can figure out shipping?




I also need an 11.2 x 24 rear tire for the same machine, do you have one in your collection?

What price for shipping?
We are in Tx 75929 (Broaddus)

Thx

 

[SonofOrange]

I just found some reference pics whilst looking through my phone, bolt pattern is 4 3/4 inch and center hole is 3 1/2 inch give or take.

If your rim fits can you put my name on it and we can figure out shipping?


View attachment 68325 View attachment 68326

I also need an 11.2 x 24 rear tire for the same machine, do you have one in your collection?

What price for shipping?
We are in Tx 75929 (Broaddus)

Thx

Morning, I know we don't have the wheels for the front. I'll be back at the farm today or tomorrow and check on the rears.

 

[SimonDewing]

Morning, I know we don't have the wheels for the front. I'll be back at the farm today or tomorrow and check on the rears.

OK thanks, its the front rim I am really desperate for, they are and odd bolt pattern and not many good ones around.
Mine has rusted where it was sat with a flat tire and sunk into wet ground for a number of years.

Probably should have been a parts machine but where is the fun in that so trying to get it working again.

The rim edge is very shallow, and I have not found a matching scrap rim yet that matches to cut a repair section and weld in.

Rear rims are OK, just need a tire for that and can get a new one if shipping is not economic.

Simon

 

[SonofOrange]

OK thanks, its the front rim I am really desperate for, they are and odd bolt pattern and not many good ones around.
Mine has rusted where it was sat with a flat tire and sunk into wet ground for a number of years.

Probably should have been a parts machine but where is the fun in that so trying to get it working again.

The rim edge is very shallow, and I have not found a matching scrap rim yet that matches to cut a repair section and weld in.

Rear rims are OK, just need a tire for that and can get a new one if shipping is not economic.

Simon

Sorry, we don't have anything that fits what you are looking for. I wish we did, I'd like to have spares. My L245 sat for about 15 years, it's been fun getting it going again. I'm down to all the little things that don't work or leak.

 

[73L260]

We've got a bunch of wheels and tires at the farm. $50 each.
Give me the sizes you needs and I'll see if we got them. I could not begin to tell you what they fit. Most of the tires have surface cracks.

Needing a back wheel for a L260 Tractor. 24x11 Wheel. Bet shipping to Winnipeg, Mb Can would be quite a bit.
The outter 1/2 of the wheel (Rim) would suffice.

 

[SonofOrange]

Sorry, we don't have anything that fits what you are looking for. I wish we did, I'd like to have spares. My L245 sat for about 15 years, it's been fun getting it going again. I'm down to all the little things that don't work or leak.

I do have these for fronts. They don't fit my L245, but they are close.

 

[SonofOrange]

Needing a back wheel for a L260 Tractor. 24x11 Wheel. Bet shipping to Winnipeg, Mb Can would be quite a bit.
The outter 1/2 of the wheel (Rim) would suffice.

If I have one, it'll have a tire on it. We could have it removed. I can check this week.

 

[Woodrow]

Looking for 9.5x22 rim

 

[SonofOrange]

Looking for 9.5x22 rim

Sorry, we don't have that one.