BX2200 Axle Seal and Fuel Line help.

[TnMowing]

I just saw this youtube vid pop up last night...replacing the front axle seal. It should cover exaclty what you have to do...

Thank you.
I did watch that video.

I got the parts yesterday.
I just need to find time to get it done.
Hoping the bearings are ok once I get in there.

 

[TnMowing]

Can anyone tell me if this is right?

I need to replace the fan belt.
If I understand this right, I need remove the bolts to the front coupling.
-The shaft that goes from the engine to the HST.-
My manual says they are Torqued to 17-20 ft/lb.
Does this sound right? Seems low to me?
But I guess it doesn’t have a lot of torque on the shaft since it’s just turning the pump in the HST?
Would it be wise to use a little LocTite on them?

Any other tips when changing the belt?
It looks like it’s going to be tight working in there.

 

[whitetiger]

My manual says they are Torqued to 17-20 ft/lb.
Does this sound right? Seems low to me?

The torque is correct for the bolts in this application.
There is no need for loc-Tite, but if you insist, use a drop of blue on the bolt.

 

[TnMowing]

The torque is correct for the bolts in this application.
There is no need for loc-Tite, but if you insist, use a drop of blue on the bolt.

Thanks for the reply.
I’ll probably use little bit of blue on them.