MMM up and down

[skeets]

OK guys I may hve missed it in the book, so here goes. The 3 PT on the B2601 lifts the MMM like on the BX. Now is there an adjustment someplace that lets the MMM lift along with the 3pt? As it is right now the 3pt is well over half way up before the MM starts to lift, and doesnt drop untill the 3pt is well over half way down. I know there has to be an adjustment bolt some place I just cant find it,, anybody?

 

[je1279]

Not sure about the B2601 but on my LX2610 there are swiveling brackets that go over the lower 3 point arms. There are also threaded rods that connect to the lifting mechanism further up but they need to be set to a specific length per the manual. Based on this, I don't see any way to adjust where the lift/lower engages with this setup.

 

[19thSF]

Hey Skeets,

I believe that your deck is the suspended type. Any relationship between the mowing height adjustment and when the deck begins to lift?

 

[Henro]

OK guys I may hve missed it in the book, so here goes. The 3 PT on the B2601 lifts the MMM like on the BX. Now is there an adjustment someplace that lets the MMM lift along with the 3pt? As it is right now the 3pt is well over half way up before the MM starts to lift, and doesnt drop untill the 3pt is well over half way down. I know there has to be an adjustment bolt some place I just cant find it,, anybody?

Can't help, but I see I am not the only person in SW PA that noticed the grass is starting to grow!