What did you do to or on your Kubota today?

[ShaunBlake]

... I generally put my Taurus Judge with .410 #7 shot on the tractor ...
But this time I didn't and sure enough saw two snakes...so I went after them with the bucket tilted down...chop chop chop...

Oooo, I love The Judge! Often wish I'd picked one up.

Good on yew! Hate snakes with a pathological revulsion. And congrats, I doubt I'd have been able to do that!

 

[zbhover]

We had several dead bushes in front of our house that I have been avoiding pulling out because I figured it would be a pain in the butt.

The B2620 and Piranha tooth bar made easy work out of the job, wish I would have done it earlier.... LOL

I was able to get under the roots with the tooth bar and curl the bucket back and loosen them up. I was able to pull all of them out without even having to get out of the seat.

I then picked up all the rocks they had around the bushes and relocated them to the other side of town to my sisters house...

 

[KennedyFarmer]

Did a few hours of work on my L3901 today. Moved 350Lbs of chicken feed to the barn. Sorry no pictures of that one.

Install my right handle on the tractor, I feel so much better having this on there I am no longer looking for something to grab since its there!

http://www.orangetractortalks.com/forums/showthread.php?t=17663&highlight=L3901+handle

Moved 2 scoops of dirt under the swings for two rubber mats.


Moved a chicken coop, this was a few days ago but this coop was built to be moved with the tractor's forks.


Moved about 4 loads of potted plants from one side of the house to the other.


Clicked another hour on the meter today.

 

[olthumpa]

I did not do anything on my tractor today!
NOTHING! NOTHING! NOTHING!
That felt good.

 

[ShaunBlake]

I did not do anything on my tractor today!
NOTHING! NOTHING! NOTHING!
That felt good.

Great! You deserve a day off!

 

[Gundoctor]

I sold my Woods BB720X bush hog and loaded it with the M7040.

 

[bmblank]

gosh darn it. I wrote a big long thing and it didn't show up here. Bah!

Sent from my XT1254 using Forum Fiend v1.3.2.

 

[skeets]

I used the 3pt to lift out a couple of locust posts that have been in the ground for gawd knows how long, that have been used to string clothes line for the last 17 years I have been here and there were in the ground long before that. Some of those post were in the ground 3 feet,,, glad its been raining and I could push them back and forth a bit other wise I would have had to cutem off with the chain saw

 

[Tallahassee Kubota Man]

Way too hot to do much here. Temps:100, "feels like" 110. Did first engine oil and filter change. 2 things a little unusual. 1) filter was almost able to be taken off by hand. Usually factory puts them on real snug. New filter had grease on the gasket. I still put a little oil on it. 2) Manual calls for 7.6 qts of oil including filter. I ended up with 8 qts which put the level only a little over 1/2 the way between low and full on the dipstick. Most of my machines end up above full if I use the manual's recommended amount.

Sure wish I could get some Arctic air sent down here.

 

[Daren Todd]

Way too hot to do much here. Temps:100, "feels like" 110. Did first engine oil and filter change. 2 things a little unusual. 1) filter was almost able to be taken off by hand. Usually factory puts them on real snug. New filter had grease on the gasket. I still put a little oil on it. 2) Manual calls for 7.6 qts of oil including filter. I ended up with 8 qts which put the level only a little over 1/2 the way between low and full on the dipstick. Most of my machines end up above full if I use the manual's recommended amount.

Sure wish I could get some Arctic air sent down here.

Can't help with the arctic air today is the coolest day they are calling for this week at 96 at noon. Neighbor is having a tree service come out in the next couple days to take down a couple oaks. So I get to bring the bota and trailer over there later on this week and cut wood after work Should be fun

 

[dfh1977]

Spent last 4 days looking at other brands of tractor porn. Mowing grass with sally at own house and clean up gardens.

 

[bmblank]

Well, saturday I spent about 6 hours on my dad's L both blazing a trail (and using the backhoe to remove stumps) and digging a hole out of a hill to get dirt for my driveway, which has been beat down to a lower point than the surrounding area. Springtime is horrible since the water just sits there and makes mud. not so good for a minivan.
Sunday I jumped on my B7100 and spent a few hours dragging the back blade around the trail I've been blazing. Got it alot smoother. When the tank was low I decided it was a good time to pull it into the garage and start on my fuel gauge install. I bought the gauge a while ago, but I just filled up the tank, so I didn't want to deal with that. With a nearly empty tank it was quick and easy. Got the sending unit in there.
Last night (monday) I finally decided how I want to mount the gauge and got it in there. Can't wait to get home today to wire it up and see how it works. Please, I hope it works.
More on the fuel gauge install when I'm done and see that it works.

 

[Daren Todd]

Neighbor had a big oak taken down yesterday. Hooked the trailer to the tractor and cut up a load of fire wood. Got the majority of the big stuff today. Got two more 8ft logs to cut up that are around 30" thick. The rest is 12" and smaller

Sent from my iPhone using Tapatalk

 

[Tallahassee Kubota Man]

Man that looks like a lot of heavy lifting on them logs Daren. How did you get them in the trailer?

 

[Daren Todd]

Man that looks like a lot of heavy lifting on them logs Daren. How did you get them in the trailer?

Rolled them The two chunks at the base of the tree kicked my butt. Was 34" across. Those two pieces took the man out of me It's pretty much a given that by this time next year we are gonna have a tractor with fel I made sure and brought it up to my wife a couple of times today and got the go ahead

 

[Tallahassee Kubota Man]

I'm afraid my butt would have been kicked well before the loading was finished.

Good idea taking advantage of the situation with the wife. I would do a lot of moaning and groaning the next few days.

 

[Daren Todd]

I'll probably keep the complaining to myself. Wife was rolling the wood out of the trailer, down hill, down the ramp. I was catching and rolling the wood over by the fence till I can get the splitter over here. That's a good way for her to give me a reason to complain She had this evil glint in her eye standing behind a 30" chunk of wood all aimed and ready for a push

 

[KennedyFarmer]

Installed my Wheel Spacers on the tractor. It was tough job!

 

[olthumpa]

Did some wiring on the tractor






Burned 5.2 gal of fuel.

 

[laketractor]

Putting in a new lawn, used Dirt Dog box blade with rippers to tear it up, Land Pride landscape rake to prep and tractor to pull harrow drag, front end loader to clean up trash and rocks. Love my BX2370.