flynavy
Member
Lifetime Member
Equipment
B7100 HST-D w/FEL,654 Whel Hrs w/blade, 2654 Hsqv mowr, 28h Cfstm snowblower&cab
I recently replace my 2 spool control valve with a 3 spool. Only so I had another valve for future use. The old 2 spool was twice the size of the new 3 spool. My question, the new spool valve gets very hot to the point it'll almost burn your hand when touching the body of the valve. Is this normal or did i mess up.
Everything works as it should, but the 3 third position is plugged off and not used yet.
Any help most appreciated
Everything works as it should, but the 3 third position is plugged off and not used yet.
Any help most appreciated