B2650 loader valve linkage

[Kerry Road Orange]

While running the front mount blower the joystick went limp! Pulled the seat and noted the joy stick cable for up and down is not connected? However; the welded in pin seems to be on the opposite side of the hole in the linkage? Almost looks like a part fell off? Any pictures or schematics would help. Thanks.

 

[whitetiger]

While running the front mount blower the joystick went limp! Pulled the seat and noted the joy stick cable for up and down is not connected? However; the welded in pin seems to be on the opposite side of the hole in the linkage? Almost looks like a part fell off? Any pictures or schematics would help. Thanks. View attachment 52275

Here is a schematic of the cable and linkage. Looks like you are missing a mounting bolt also.

 

[Kerry Road Orange]

Here is a schematic of the cable and linkage. Looks like you are missing a mounting bolt also.

thanks for the schematic, it helped a lot. I just finished getting everything apart and found Kubota welds the linkage pins to the mount. The “B” post has sheared off. I am thinking of drilling then welded head and tac welding in some 8mm drill rod. Otherwise I would need a whole new bracket.

 

[Kerry Road Orange]

thanks for the schematic, it helped a lot. I just finished getting everything apart and found Kubota welds the linkage pins to the mount. The “B” post has sheared off. I am thinking of drilling then welded head and tac welding in some 8mm drill rod. Otherwise I would need a whole new bracket. View attachment 52291 View attachment 52292

found the perfect bolt in the barn, Cut the threads off and used only the smooth shoulder - cleaned out the old weld and welded this one in. Tractor is all back together and working great again.