Do not rush down the hill and drive in a building...I was finally able to do my first mowing of the season. I'll be taking care of my Mom's place tomorrowFelt really good to get back in the seat
Have fun.
carl
What did you do to or on your Kubota today?
- Thread starter gurn
- Start date
Have fun.
carl
Kubota_Man
Member
Equipment
BX24, Rear blade, Front blade, Snowblower, 54" MMM, Box scraper, Landscape rake
You know I was thinking the same thingDo not rush down the hill and drive in a building...
Have fun.
carl
I didn't do anything with the Kubota tractor today, but does a Kubota-engined Bobcat count? I made a bale spear the other day for the skid loader, and moved round bales all morning with it.
kinda new at working on tractors but i pulled the hood off and cleaned off the eng. and replaced some old bolts , rebuilt the hydraulic valve for the frount loader witch did not help it might need a new one .
Kubota_Man
Member
Equipment
BX24, Rear blade, Front blade, Snowblower, 54" MMM, Box scraper, Landscape rake
The best part about my bobcat is the engine. That's the only part I can depend on being ready for work every day.
That Kubota 4 banger is a sweet running engine. I have a friend with a Deere skid steer- I think I can just about replace my engine for the cost of a Deere waterpump...
Put Kubota L175 decals on and new radiator hoses. Pulled off the tach. drive unit to service it before I order a new cable and found the drive blade on the gear was sheered off so unless I can find a replacement I won't be needing a cable. Yesterday I adjusted the valve clearance and it sounds smoother to me, they were all loose.
Attachments
Last edited:
Burt
New member
Equipment
L3700SU, box blade, 6 foot rhino blade, 1 bottom plow, 3 point receiver hitch.
Love your sense of humour and realism. Especially regarding the costs of parts.
Today, my friend loaded our L3700SU into a large tilt trailer with box blade attached and we took it over to another friends place and I fixed his fouled up drivway big time! Using the loader, I spread the gravel and then smoothed and graded it out with the box blade. What looked like a country dirt road now look like a fun house slide only with gravel on it.
Yesterday, we used the box blade at an angle to dig out beside our garage to slant the dirt away from the building and build a retaining wall. Worked perfectly.
I'm learning how to use this Orange tractor and love it capabilities.
Over,
Burt
Today, my friend loaded our L3700SU into a large tilt trailer with box blade attached and we took it over to another friends place and I fixed his fouled up drivway big time! Using the loader, I spread the gravel and then smoothed and graded it out with the box blade. What looked like a country dirt road now look like a fun house slide only with gravel on it.
Yesterday, we used the box blade at an angle to dig out beside our garage to slant the dirt away from the building and build a retaining wall. Worked perfectly.
I'm learning how to use this Orange tractor and love it capabilities.
Over,
Burt
bcbull378
Member
Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
I started digging out a dry pond that has silted in over the years. The pictures are about an hour into the project I was able to dig down about 4' at the end of the Day. Im going to take it down at least another 6' itll be nice next winter it should catch enough water to water the cattle and deer at that end of the ranch till the next winter
Attachments
Gundoctor
New member
Lifetime Member
Equipment
Kubota M7040 4x4/ BX2230 4x4/ JD MX 8/ Ford 101 Moldboard 3 bottom Plows -
Took my M7040 and Ford 101 plows out. Plows about 4 acres. They worked just great. I just restored the plows.
David Pidgeon
New Haven, Vt.
David Pidgeon
New Haven, Vt.
Attachments
bcbull378
Member
Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
Nice job on the plow , theres no tool like a moleboard plow I have a Feruson 101A 2 bottom
I cleared and leveled about 200 square feet of jungle and hauled, deposited, and spread wood chips in order to erect a hardy kiwi arbor at edge of our forest-surrounded property.
Before that I removed the muffler and got the hole welded and a new extension made for it at Meineke for $40.
Before that I removed the muffler and got the hole welded and a new extension made for it at Meineke for $40.
Last edited:
76_Bronco
Member
Equipment
B7200 4WD w/FEL, 4' disc, 4' Brush Hog, 14" Plow, 4' Blade, JD 246 2 row Planter
I finally found a place to mount a toolbox on the old B7200. Now if I could only figure out where to mount a cup holder???
Attachments
gpreuss
New member
Lifetime Member
Equipment
L3200DT w/FEL, K650 Backhoe, 5' Rotary, 40" Howard Rotavator, 6' Rhino blade
Great idea, Great job! I'm still looking for a better place to mount the toolbox on my L3200...
This is something I put together that fits on the FEL's Sub Frame on the left side. Not very big, 9½" X 8½" X 6½" Deep, but enough to hold a couple of chains, couple of tools, gloves, and the different size balls for the hitches.
