B2601 FEL

[Gettingold]

Does anyone know if Kubota has or someone sales a Loader Levelling guide for the Front End Loader on a B2601.

The Loader is a model LA434.

Does the kit you found for your L2501 with the LA525 loader work as you expected.

 

[Roadworthy]

You'll probably need the loader model number for starters. My L2501 uses the LA525 loader. I did a bit of surfing and found no leveler for that loader. There were levelers listed for a couple prior loaders but not mine. Nevertheless my dealer was able to procure the proper indicator for my loader. Incidentally, my model wasn't covered in the instructions. Check with your dealer. Check with Messicks.

 

[edritchey]

You'll probably need the loader model number for starters. My L2501 uses the LA525 loader. I did a bit of surfing and found no leveler for that loader. There were levelers listed for a couple prior loaders but not mine. Nevertheless my dealer was able to procure the proper indicator for my loader. Incidentally, my model wasn't covered in the instructions. Check with your dealer. Check with Messicks.

This is the part number for the LA525 Bucket level indicator-
C02000 LEVEL INDICATOR [OPTION] ## [L2130]

 

[Roadworthy]

The kit I purchased was a perfect fit for my tractor. It obviously works on several models so Kubota must have some degree of consistency across several years and models. It was about $75 from my dealer, I think.

 

[Gettingold]

The kit I purchased was a perfect fit for my tractor. It obviously works on several models so Kubota must have some degree of consistency across several years and models. It was about $75 from my dealer, I think.

Did you install the kit on a B2601 with a LA-434 loader, if you did can you post the part number for me.

 

[B737]

I called two dealers, plus my own digging, there is no level indicator kit available for LA435, that comes on B2601. Besides the sticker or the mechanical self leveling arms. I've found the sticker gets you pretty close.

 

[Mossy dell]

The kit I purchased was a perfect fit for my tractor. It obviously works on several models so Kubota must have some degree of consistency across several years and models. It was about $75 from my dealer, I think.

Does anyone know if this is the kit that can be used on the LA435 loader that's on my B2601? I asked Neil Messick if there was an indicator made for the B series and he said no. I should have asked him or someone in parts whether one can be retrofitted for B series/B2601.

 

[RBA50]

There are several threads about level indicators on TBN (tractor by net). If you are handy enough to retro fit one made for a different loader, you can easily build one from scratch for just a few dollars.