I understand I can install a work light switch in the cutout next to the regular light switch on the dash. I even have a part number TD350-75360. However, I am unsure what connector/outlet/circuit this switch will control. My understanding is the connector under the rear fender is hot whenever the ignition switch is on, so where is the connector/wiring that the work light switch controls?
Work Light Switch B2650
- Thread starter normd
- Start date
On a cab version of the B2650, the switch and wiring control the rear work lights that would be just below the roof line. The plug is already wired in on the same side as the unused cutout, and just taped to a support under the dash until used. If you are referring to an open station B2650, maybe someone with on will chime in. But my guess would be that it would be terminated somewhere near the rops so the rear work lights could be connected to it there.
i7win7
Well-known member
Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
I prefer to add my own electrical system, keep factory wiring - factory original to avoid warranty issues.
www.tractorbynet.com
Adding electrical devices to tractor
Purpose of post: to provide general ideas to fellow tractor owners wishing to add lights, electric sprayers, even some high current accessories for short term intermittent use (think winches, jump starts). I'll start with the high power preparations. #1 good heavy duty wire, at Walmart you...
www.tractorbynet.com
Orange1forme
Active member
Equipment
B2650 HSDC, filled tires, wheel spacers, B2728B , LA534A FEL, 3rd valve kit
On the B2650HSDC this would be all factory wiring.I prefer to add my own electrical system, keep factory wiring - factory original to avoid warranty issues.
Adding electrical devices to tractor
Purpose of post: to provide general ideas to fellow tractor owners wishing to add lights, electric sprayers, even some high current accessories for short term intermittent use (think winches, jump starts). I'll start with the high power preparations. #1 good heavy duty wire, at Walmart you...
If you buy their kit, then you get everything you need.
If not, then the only issue is finding the matching connection to the factory plug for the lights themselves.
The wiring harness is all factory installed, just needs the switch and lights.
i7win7
Well-known member
Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller