Headlight Lens

[johncrumbie]

Broke a lens when limb wedged up with FEL. B2601. Can I replace lens only. Where can I get it.
Kubota/Messicks only offer full panel for replacement. Around $235.

 

[SDT]

Broke a lens when limb wedged up with FEL. B2601. Can I replace lens only. Where can I get it.
Kubota/Messicks only offer full panel for replacement. Around $235.

Don't think so.

Believe that headlamps are serviced only as assemblies.

SDT

 

[Tire Biter]

Thats not it. I poked a hole in one of mine, and found out it’s around $250 for the whole assy. Can’t buy just the headlight lens. I had a scrap headlight lens I had layin around and cut out a piece and glued it over the hole. cant really notice it cept up close.

 

[Pau7220]

The lens is not serviced separately. If the housing is ok, make one from plexiglass. You can put the curve in it with a heat gun. I did this on my Honda 4518 about 5 years ago and it's still intact.

 

[johncrumbie]

Thanks.

 

[Palmettokat]

Thats not it. I poked a hole in one of mine, and found out it’s around $250 for the whole assy. Can’t buy just the headlight lens. I had a scrap headlight lens I had layin around and cut out a piece and glued it over the hole. cant really notice it cept up close.

Would Lexan work as well? Understand it is tougher.

 

[Tire Biter]

Lexan will work.

 

[Pau7220]

Would Lexan work as well? Understand it is tougher.

I never tried shaping it with a heat gun. Try it if you have a scrap and let us know.