Ballast box

UpNorthMI

Well-known member
Lifetime Member

Equipment
L3200, L3901, MX5800, SVL75-2, KX040
May 12, 2020
850
568
93
Up North, MI
Wow lot's of views on this one! I'll wade in with my own experiences. I would not use the FEL for anything serious without a ballast box or a reasonable size implement on the back. My tractors with FEL's also have loaded tires. My most recent tractor was a L3901, shortly after delivery I tried to lift 2 metal mesh cages (maybe a total of 400lbs) without a ballast box or significant attachment, that was enough to lift the back wheels and made me realize that my dealer forgot to load the rear tires. It's very easy to have issues as the FEL is carrying the weight very far out in front from the pivot point. You will feel a lot safer with a ballast box.

Remember there are many other factors about safety with FEL: carry the weight low when traveling, avoid sudden manovers, drive slowly, find level ground etc, I've give this lesson so many times to my teenager who is operating under my supervision, I just hope some of it sticks.

Good luck with your new tractor
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
....
thankfully his homeowners covered the totaled tractor.
That’s a heck of a homeowners policy! Most have a deductible of around 3% - 5% of the home valuation. That’d rarely cover a tractor replacement.
 

Muzzy

Member
Lifetime Member

Equipment
B2650HSDC
Feb 13, 2019
274
4
18
WNY
Ballast Box a must with Forks, especially heavy or extended loads, darn good in winter also for traction pushing snow
20190524_211409.jpg
 

Muzzy

Member
Lifetime Member

Equipment
B2650HSDC
Feb 13, 2019
274
4
18
WNY
Thanks troops, installed Ballast Box shortly after purchased last year, traded in B2601, there is a few stones in the front tires I missed..