Smallest tractor with hydro "Top n Tilt" ?

[miketrock]

Can hydro Top n Tilt be put on a B2601 with parts from other kubotas ? Without going completely custom fabbed ? On a B2601, you can get 2 rear remote valves, but Top n Tilt isnt offered.

 

[Dave_eng]

Top and tilt is installed by just plugging into existing rear remotes.

Apart from the "top and tilt" cylinders, hoses, & couplers, nothing else is needed

Dave

 

[old and tired]

Kubota doesn't have anything... you'll have to get them elsewhere. Goggle "B2601 Top n Tilt" - there are ones with it.

 

[miketrock]

ok, thanks … will check it out.

 

[miketrock]

I just went on kubotausa.com and saw that there's a Top n Tilt kit for an L2501 tractor. Can that Top n Tilt kit for the L2501 tractor be used on a B2601 ? Why start from scratch if its already engineered …. maybe just plug n play …?...

 

[greenacresnorth]

the L2501 parts will not fit, the B2601 has a totally different 3 point linkage style. there is a fellow on the site that builds kits for your tractor, the fabrication and engineering is second to none.

https://www.fitritehydraulics.com/

 

[MtnViewRanch]

the L2501 parts will not fit, the B2601 has a totally different 3 point linkage style. there is a fellow on the site that builds kits for your tractor, the fabrication and engineering is second to none.

https://www.fitritehydraulics.com/

Thanks for the compliment.

As mentioned, completely different.

1st pic is for a B series.

2nd pic is for std size L series such as the L2501 that was mentioned, up to an L3901.

Different top link strokes, different ends on both the top & side links.