LA1154 loader
- Thread starter Godaddy
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Re: LA1134 loader
First things first... Go out a read the loader number again, as there is no LA1134 loader... While your there get the serial number too.
Second I think your talking about paint caps, and no you can't get them, they are supposed to come off before delivery, they are only temporary and not meant to stay in place, eventually they will all just fall out.
But all of this is guessing till you provide the proper model information.
First things first... Go out a read the loader number again, as there is no LA1134 loader... While your there get the serial number too.
Second I think your talking about paint caps, and no you can't get them, they are supposed to come off before delivery, they are only temporary and not meant to stay in place, eventually they will all just fall out.
But all of this is guessing till you provide the proper model information.
Re: LA1134 loader
CAP, BOSS - 7J417-58980 $1.28
A total of 6 are needed.
Expect these are the same as the LA1154 loader on the M7060 which Messicks confirms.
CAP, BOSS -7J417-58980 $1.28
Dave
The loader on my M7040 has these caps. One or two fell out and the dealer was able to supply new ones.
CAP, BOSS - 7J417-58980 $1.28
A total of 6 are needed.
Expect these are the same as the LA1154 loader on the M7060 which Messicks confirms.
CAP, BOSS -7J417-58980 $1.28
Dave
Attachments
Last edited:
Re: LA1134 loader
Not sure what the point in a cap is. Take a disposable shop towel and wipe off the grease that has oozed out.
Not sure what the point in a cap is. Take a disposable shop towel and wipe off the grease that has oozed out.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Ok I'm not losing my marbles... Well not about this at least.
They don't show any on the LA1154 but they do on the LA1153????
They don't show any on the LA1154 but they do on the LA1153????
Attachments
NIW
This image is from Messicks.
You show a LA1154S with no caps and this image is for a LA1154E which has the caps.
Next, on Messicks I found a LA1154S with caps
Confused...........
Dave
This image is from Messicks.
You show a LA1154S with no caps and this image is for a LA1154E which has the caps.
Next, on Messicks I found a LA1154S with caps
Confused...........
Dave
Attachments
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
If you really want plugs, go to any electronics supply house and enter 'Plug Buttons' and many will come up in various sizes and materials and colors. Measure the ID of the hole and order accordingly. Very common in the electronics industry. Plug buttons or knockout plugs. Probably a lot cheaper too.
At $1.28 per genuine Kubota plug why look for alternatives.
I like having the plugs. They limit where the grease squeezes out and hence what and where I have to wipe up.
I can walk beside the loader with one of my few decent clothes on and not end up with a grease smear.
Dave