B6000 air cleaner parts

[justinhw]

Looking for the lower oil pan for the air filter assembly for my (new to me) B6000. I was searching on the site and someone mentioned part:10283-11210

However, it's different then in my part manual and I can't find a photo online.

Can someone verify if that's the part I need? I'm looking at $40-50 online shipped.

Alternatively, if someone has an extra for sale here I'm all ears!

 

[North Idaho Wolfman]

Looking for the lower oil pan for the air filter assembly for my (new to me) B6000. I was searching on the site and someone mentioned part:10283-11210

However, it's different then in my part manual and I can't find a photo online.

Can someone verify if that's the part I need? I'm looking at $40-50 online shipped.

Alternatively, if someone has an extra for sale here I'm all ears!

That P/N is just for the gasket.

I'll give you the P/N's but they are pretty much worthless in this case as none of the parts are still available.

Whole air cleaner P/N 15231-11012 superseded to P/N 15231-11010 and then discontinued.

If you don't have the bottom then you probably don't have any of the internal parts either:

Pan P/N 10283-11240
Clamp P/N 10283-11290
Gasket P/N 10283-11210
Damper P/N 10283-11440
Nut P/N 10283-11330
Washer P/N 10283-11120

Now with all that worthless info, take this worthwhile info and go here and buy the whole unit:
https://www.ebay.com/itm/KUBOTA-B60...411523?hash=item420f87fb83:g:9oMAAOSws5FeC9UY

 

[justinhw]

Thanks, way more complicated than I thought! I just bought the ebay unit you linked, more than what I want to pay but if it's NLA I'm SOL!

JR

 

[edinottawa]

A little late to this party, seeing as you have bought the replacement. HOWEVER, for anyone in the future looking at this thread I had seen some time ago a thread where, having found out that the plastic bowl was NLA, the fellow made a fabbed replacement out of PVC (white) drain pipe. Methinks 4". I seem to recall he used a plug cap for the bottom and a coupler to match the mounting flange of the defunct bowl. A small piece of PVC was glued into the bottom to make the baffle.

If you have the old bowl bits available, the High-Technology way to do this today would be to get the old one laser scanned and have it 3D printed. Maker Shops are popping up all over so the price for these services are dropping fast.