Where do I connect hydraulic lines for backhoe L2501

[Michael In Tennessee]

The Kubota hoes usually do have a "tank" line. But the BH77 for the L2501 doesn't.

BH92 doesn't either.

 

[Joel K]

Hydraulic lines all hooked up and the backhoe works great. Tested hooking up to 3 point. I purchased a bh77 subframe and will now modify the prairie dog backhoe to connect to it. I will post pics when done.

Thanks for all the help with hydraulic connections. Purchased everything off the shelf at Tractor Supply. Very inexpensive.

 

[North Idaho Wolfman]

Hydraulic lines all hooked up and the backhoe works great. Tested hooking up to 3 point. I purchased a bh77 subframe and will now modify the prairie dog backhoe to connect to it. I will post pics when done.

Thanks for all the help with hydraulic connections. Purchased everything off the shelf at Tractor Supply. Very inexpensive.

Excellent to hear!

 

[mpsmith60]

It's not a Kubota backhoe however the hydraulics will essentially be hooked up in the same manner. I cannot find an owners manual for the bh77 that shows the hydraulic connections on the tractor. I know there is a power beyond on the loader controls and possibly one on the valve block next to the relief valve. Not sure where an open tank valve is. Looks like one next to the 3 point drop rate valve. I need pictures of a current bh77 setup

If you backhoe is a 3 point mount, you need to be careful that you don't snap your tractor in half due to the forces on while using and carrying the backhoe. If you happen to have a subframe on the tractor, you'll be fine.