L2250 front end loader

[8813paul]

Hello, I am new to the forum. Thank you for the opportunity to be here.

I have an l2250 and would like to put a front end loader on it and know where there is a kubota loader that the guy says will fit around a 20 to 30 hp kubota. He doesnt know the model or what it came off of. I was wondering how hard it might be to modify the mounts that are with it to fit my tractor.
Thanks.

 

[North Idaho Wolfman]

Hello, I am new to the forum. Thank you for the opportunity to be here.

I have an l2250 and would like to put a front end loader on it and know where there is a kubota loader that the guy says will fit around a 20 to 30 hp kubota. He doesnt know the model or what it came off of. I was wondering how hard it might be to modify the mounts that are with it to fit my tractor.
Thanks.

Depending on the exact loader, and if the whole subframe is included it should be fairly easy.

There were 4 loaders (stock) that fit that tractor so odds are in your favor.

BF400G
LA400
LA450
L485

 

[8813paul]

Thank you very much North Idaho wolfman. I will do some checking. You are a great help.

 

[Stubbo]

Sorry to hijack but would these same loaders fit my L3250 ? Thanks

 

[North Idaho Wolfman]

Sorry to hijack but would these same loaders fit my L3250 ? Thanks

Nope, your limited to a LA650A

You might want to look at Woods loaders for an alternate.

 

[Stubbo]

Nope, your limited to a LA650A

You might want to look at Woods loaders for an alternate.

Thank you, North Idaho Wolfman, Much appreciated !

 

[Dabota87]

Depending on the exact loader, and if the whole subframe is included it should be fairly easy.

There were 4 loaders (stock) that fit that tractor so odds are in your favor.

BF400G
LA400
LA450
L485

Hi, I am new here and I have a few questions about this loader topic. The literature for the L2250 show just the BF400G loader for this model, how is it that the other three loader also fit as well? Are there capacities greater or lesser than the BF400G ? Should I expect to have to find slightly different mounts for all or some of these other loader Models? I am really pleased to hear that there are more options than jut one loader for the L2250 as options are always welcome in my opinion ! Thanks for your input

 

[North Idaho Wolfman]

Hi, I am new here and I have a few questions about this loader topic. The literature for the L2250 show just the BF400G loader for this model, how is it that the other three loader also fit as well? Are there capacities greater or lesser than the BF400G ? Should I expect to have to find slightly different mounts for all or some of these other loader Models? I am really pleased to hear that there are more options than jut one loader for the L2250 as options are always welcome in my opinion ! Thanks for your input

There is too many differences between all the models to be able to explain, they will all work.
Some models will require changes in mounts some will require changes in hydraulics.

The chances of you finding any of the models available are going to be very rare to say the least.

But find just one for sale close enough to you to make sense, then you've got a winner.

 

[Dabota87]

There is too many differences between all the models to be able to explain, they will all work.
Some models will require changes in mounts some will require changes in hydraulics.

The chances of you finding any of the models available are going to be very rare to say the least.

But find just one for sale close enough to you to make sense, then you've got a winner.

So how to determine which mount depending on which loader models and what hydraulic pieces need to be replaced? Is there any reference information to determine this or Is it a matter of just reengineering what doesn’t fit? Thanks again

 

[North Idaho Wolfman]

Yea I guess you could say, it is just a matter of just reengineering what doesn’t fit.