Plastic radiator repair

[Witchgrass]

I had a tree limb push and break off a small piece of the lower radiator housing. Anybody here successfully JB weld, or find another solution to weld the plastic back together? Tractor is a L 4400.
Thanks,
Craig

 

[AllDodge]

I've had good luck with Locktite, but have never tried it on a radiator. JB and Gorilla also makes a similar plastic epoxy

https://www.amazon.com/Loctite-Plastic-0-85-Fluid-Syringe-1363118/dp/B0044FBB8C

 

[L35]

Preparation is key, get it squeaky clean!

 

[North Idaho Wolfman]

If you don't have any luck fixing it, or finding a used one, here is an aftermarket one for very reasonable... well compared to an OEM.

https://www.completetractor.com/rad...nc8VP8SRojaApsrvymT4YLwtpywBMQfRoC1e4QAvD_BwE

 

[Witchgrass]

If you don't have any luck fixing it, or finding a used one, here is an aftermarket one for very reasonable... well compared to an OEM.

https://www.completetractor.com/rad...nc8VP8SRojaApsrvymT4YLwtpywBMQfRoC1e4QAvD_BwE

Awesome! From the posts I’ve seen on here, that’s about 1/2 the price of what New ones are going for. That’s prob what I’ll do.
Thanks Wolfman!