Oil change capacity

Pau7220

Well-known member

Equipment
L3650 GST, Landpride TL250 FEL w/ Piranha, 6' King Kutter, GM1084R Finish
Aug 1, 2017
785
278
63
Scranton, PA
This is an excellent reminder that cheap oil filters can contribute to problems. Cheap oil filters often use stiff, ineffective back-flow designs.
One more thing to keep in mind.... when this happens, it's oil from the dirty side of the element returning to the pan.
 

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,365
1,415
113
Austin, Texas
The filter is a Kubota filter.

The tractor will sit without being started for a month or two when I noticed this.


Sent from my iPad using Tapatalk
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,203
6,373
113
Sandpoint, ID
The filter is a Kubota filter.

The tractor will sit without being started for a month or two when I noticed this.


Sent from my iPad using Tapatalk
On kubota engines they have an anti drain back check ball in the system, but the older the engine the easier for that system to leak down.
So a quick run then let it settle for a min, they check oil to make sure it's up to level is a good choice. :D
 

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,365
1,415
113
Austin, Texas
On kubota engines they have an anti drain back check ball in the system, but the older the engine the easier for that system to leak down.

So a quick run then let it settle for a min, they check oil to make sure it's up to level is a good choice. :D

Is that check ball system something that can be repaired? What would Kubota call it in the illustrated parts list?


Sent from my iPad using Tapatalk
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,203
6,373
113
Sandpoint, ID
Sadly probably not without extensive work, the seat is aluminum and prone to wear after a long time.


It's really not necessary to worry about, because the oil system moves oil to all points that could be harmed extremely fast, hence why you don't have a bearing issue. ;)

 

Attachments

Last edited:

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,365
1,415
113
Austin, Texas
Thanks for the information


Sent from my iPad using Tapatalk
 

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,040
3,316
113
Texas
Wolf, … what label does that illustration give to identity that part you highlighted? (Are you certain that's an anti-drain-back? … or is that a pressure-relief instead?)