Which tips for 3rd function?

[SilveradoBrian]

Hey everyone. 1st post. Got an MX5800 with the 3rd function on it. FedEx just dropped off a Titan tree/post puller with the flat faced couplers. I had picked up some standard Pioneer style to change them out, but they wouldn't fit the tractor. Apparently the ones on the tractor are 3/8", but a different style completely. Anyone else have this problem?

 

[Titan17]

Go to Summit Hydraulics website. Frequently asked questions and look at what size coupler do I need.

 

[SilveradoBrian]

Quick Coupler Identification Chart. I've been all over the intranets the past couple of days; how did I miss that? Thanks, Titan!

 

[Michael In Tennessee]

Kubota seems to like ISO 7241-B. That is what is on my MX. I don't know about the 3rd function since its not a Kubota branded part. Its either Land Pride or WR Long.

But, I'm going to use common ball tip AG couplers (ISO 5675) for my 3rd function and rear remotes. That is the type of connector coming on my grapple. Also, due to the lack of finding 3/8" couplers, I'm going with 1/2" couplers. From Summit Hydraulics, they are a tad cheaper and come with dust boots. Either size is over kill. I know that I need to add a restrictor orifice on my Top link already.

 

[Hozzie]

I would change the third function to 1/2 flat flace in front. Much better connection and easier to use in my view. I have them on my MX5800 as well, but was able to tell the dealer to use flat face when installing third function.

 

[SilveradoBrian]

Kubota seems to like ISO 7241-B

Yeah, I stopped at the dealer and that's what it was. Then I needed a 3/8 NPT to 3/8 flared adapter. Took a few places to find that.