B2601 LED work lights

[slauso]

Bought a 12 inch LED light bar on Ebay and they thru in a couple of LED work lights complete with wiring harness. Bought a couple of switches off Amazon and installed.

 

[greeno]

Cool switches!


Sent from my iPhone using Tapatalk

 

[TiggerToo]

How did you mount the front LED? Hard to tell with it on. It's vey bright. Those switches look like they were a factory install. Very nice.



Sent from my iPhone using Tapatalk

 

[slauso]

I mounted the front LED to the brush guard. The light comes with a wiring harness and relay that run directly from the battery thru a 30 amp fuse which also came with the harness. The rear lights work thru the worklight wiring harness that came with the tractor. Cutting the holes for the switches was a little stressfull...lol but looks pretty good. All together the lights and switchs cost me 70.00 plus my own labor.

 

[hockeystewey]

nice work!!!!

Might you have any links to the materials that you used??

 

[D2Cat]

Nice. Show us a picture with the lights off!

 

[slauso]

nice work!!!!

Might you have any links to the materials that you used??

The lights are from Ebay.ca item number 301976649873

The switches were bought from amazon.ca and are listed below

MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue

 

[slauso]

Nice. Show us a picture with the lights off!

Here some pics with the lights off. Also replaced the plastic tool box with a bigger metal one that has secure hasp. The plastic lid kept popping open. Nice to have a hammer handy in the new tool box.

 

[hockeystewey]

The lights are from Ebay.ca item number 301976649873

The switches were bought from amazon.ca and are listed below

MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue

I found these in the US...not sure if the same items or not:

https://www.ebay.com/itm/12inch-72W-4-18W-LED-Light-Bar-Work-SPOT-FLOOD-CREE-4WD-CAR-ATV-Wiring-Kit-14/273064742279?epid=6014759991&hash=item3f93ed4d87:g:-nQAAOSwU9RagAgM

https://www.amazon.com/Auxbeam-Rocker-Switching-Motorcycles-Trailers/dp/B071DGSBD7/ref=pd_rhf_ee_p_img_1?_encoding=UTF8&psc=1&refRID=DSXAETHNJF0ZXJEZJVGT

 

[jgregory2010]

Looks great slauso. I've been looking form something like this for my 2301. I was thinking I will put the light on the under side of the top bar or on top of the middle bar to prevent knocking it off if I bump something. Looking at your pictures it looks like it would fit on either one. Again, great job, thanks for the pics.

 

[slauso]

Thanks jgregory2010......Did a lot of thinking on where to mount the lights. Good thing I am retired.

 

[slauso]

hockeystewey....the links you show look exactly like the lights and switches I used