B2650 Overall Width?

Duke

Member

Equipment
2018 Kubota B2650 HDSC with FEL and 72â€￾ rear blade.
Jul 29, 2014
31
0
6
Metamora, MI
What is the overall width of a B2650 with turf tires measured to the outside walls of the rear tires? Anybody? I know the spec sheet says 53 min. Tread but abbreviation can be interperated as minus or minimum. Not sure which. They could have spelled the WHOLE word so guessing game is not required. Looking at tillers and Ive been told that it should be wider than the overall width so you dont have tread marks in the tilled soil?
 
Last edited:

rkidd

Active member
Lifetime Member

Equipment
B2650, FEL With QA 60"mmm, 3pt FDR1672,homemade ballast box, BB 1572 box scraper
Dec 7, 2015
743
67
28
Jefferson Ohio
My turfs are 55" in width. I run a Land Pride RTR 1266 rototiller on mine and it handles it great.
 

beckmurph

Well-known member

Equipment
Kubota LX2610TLB/Woods finish mower/woods rotary cutter/
Aug 23, 2012
307
259
63
catlettsburg, ky
My 2650 has R4 tires.
My tiller is a rtr1258 LandPride and
it covers the tracks completely.


Sent from my iPhone using Tapatalk
 

Gadget

New member

Equipment
B2650, LP FDR1672 Finish Mower, Box Scraper, LP QH05
Jun 8, 2018
14
1
3
Hodgenville, Kentucky
What is the overall width of a B2650 with turf tires measured to the outside walls of the rear tires? Anybody? I know the spec sheet says 53 min. Tread but abbreviation can be interperated as minus or minimum. Not sure which. They could have spelled the WHOLE word so guessing game is not required. Looking at tillers and Ive been told that it should be wider than the overall width so you dont have tread marks in the tilled soil?
I am running Titan turf tires with factory rear wheel spacers. The overall width on my B2650 is approximately 60 inches.
 
Last edited:

Duke

Member

Equipment
2018 Kubota B2650 HDSC with FEL and 72â€￾ rear blade.
Jul 29, 2014
31
0
6
Metamora, MI
I am running Titan turf tires with factory rear wheel spacers. The overall width on my B2650 is approximately 60 inches.
Gadget, what size spacers? I have the turfs with 3" spacers that should make mine about 60" wide. I have a Landpride RGR1258 on order and was concerned that a couple inches would not get covered.
I priced going to the next size (RGR1266) but the price went up by about $600 for the added 8 inches. Couldn't justify it for the sakes of not covering a couple inches. I suppose I could offset the 3 point to one side if it really makes that much difference.
 
Last edited:

Gadget

New member

Equipment
B2650, LP FDR1672 Finish Mower, Box Scraper, LP QH05
Jun 8, 2018
14
1
3
Hodgenville, Kentucky
I havent measured them but believe the OEM spacers are 1 5/8 inches each
 
Last edited: