I have seen a lot of posts about thermosiphon radiators overheating,
here may be a solution.
I don't have a tractor to test on, i saw this installed on a parade tow vehicle that was run at low speeds, to keep it from overheating.
The pump installs in the lower radiator hose. 20 gallons per minute.
Water flows from the radiator to the engine on the lower hose.
https://www.jegs.com/i/Meziere/680/WP136S/10002/-1
The fittings, you need to adapt the AN (Army Navy) 12 fitting to 1 and 1/2.
Actually the b7100 uses 34MM I think, which is 1 and 3/8, but only 1 and 1/4 and 1 and 1/2 hose ends are available. Four color choices.
https://www.jegs.com/p/Meziere/Meziere-Water-Pump-Fittings/753981/10002/-1
Pump bracket
https://www.jegs.com/i/JEGS/555/50956/10002/-1
And last, a thermostat, to keep the temperature stable.
Installs in the upper radiator hose, so water flows from engine to radiator...
4 temperatures to choose from, 160, 170, 185, and 195
https://www.jegs.com/p/Meziere/Meziere-Inline-Thermostat-Housings/1503584/10002/-1
here may be a solution.
I don't have a tractor to test on, i saw this installed on a parade tow vehicle that was run at low speeds, to keep it from overheating.
The pump installs in the lower radiator hose. 20 gallons per minute.
Water flows from the radiator to the engine on the lower hose.
https://www.jegs.com/i/Meziere/680/WP136S/10002/-1
The fittings, you need to adapt the AN (Army Navy) 12 fitting to 1 and 1/2.
Actually the b7100 uses 34MM I think, which is 1 and 3/8, but only 1 and 1/4 and 1 and 1/2 hose ends are available. Four color choices.
https://www.jegs.com/p/Meziere/Meziere-Water-Pump-Fittings/753981/10002/-1
Pump bracket
https://www.jegs.com/i/JEGS/555/50956/10002/-1
And last, a thermostat, to keep the temperature stable.
Installs in the upper radiator hose, so water flows from engine to radiator...
4 temperatures to choose from, 160, 170, 185, and 195
https://www.jegs.com/p/Meziere/Meziere-Inline-Thermostat-Housings/1503584/10002/-1