L245 dt implements

[jordan2140]

I have a late 80s model 245 dt with a loader and backhoe. I love this tractor!

I would like to add a brush hog and box blade. Should I go 4 or 5 feet on these? I read 5 hp for every foot of hog is a good rule of thumb.

The 4 foot implements are a bit harder to find used.

 

[jordan2140]

To the top...

 

[shootem604]

Nice unit! Mine has more rust and dents and has a few things that need fixing. Also looking for a backhoe for mine. Is your backhoe built by Kubota?

 

[North Idaho Wolfman]

Light weight 5 footer will work fine on that tractor, you'll just have to go a little slower in deep heavy stuff.

 

[jordan2140]

Yes it is a kubota backhoe. I'll have to check the model number. Only complaint is getting it off and on the 3 point. But it is handier than a shirt pocket!

Nice unit! Mine has more rust and dents and has a few things that need fixing. Also looking for a backhoe for mine. Is your backhoe built by Kubota?

 

[shootem604]

I'm keeping an eye open for a backhoe while I work on the myriad other issues with my tractor.

 

[jordan2140]

Got a 5 ft box blade lined up for this weekend for $300. Seems like a great deal. Even has rippers. Will report back.

What are the best brands for brush hogs that won't break the bank? Should I even consider king cutter and the TSC type brands?

 

[Russell King]

Look at Modern Ag made in Beaumont Texas
They are well built and galvanized after construction except for the 4 foot version

There is a brand j bar that makes some with 4 blades
http://jbarcorp.com/cutter/cutter.html

No idea how they are but seems like a good idea


Sent from my iPad using Tapatalk

 

[jordan2140]

Thanks for the comments. I have a rhino se5 brush hog lined up. It is class 1 but can't seem to find any info online about weight. He is running it on a 33 hp with some front weights but surely less than my loader weighs. Any concerns?

 

[billrigsby]

I have a rhino se5 brush hog lined up. It is class 1 but can't seem to find any info online about weight.

Here you go.....

 

[North Idaho Wolfman]

It is class 1

It's not class 1
It's Cat 1
or hitch Category I

 

[jordan2140]

Here you go.....

Thanks! I found another site that recommended 20 to 40 hp for the se5 as well as listed the weight.

http://www.tricorpusa.com/regular-duty-rotary-cutter.html

 

[jordan2140]

Well the rhino got bought before I could get it. A pretty good deal at $400 so the search continues for a brush hog.

I did get a Cammond brand box blade for $300 (even if it's the wrong color!). 5 ft with 4 rippers.

 

[jordan2140]

Got a 4 ft shredder. it is a nice heavy duty one. Thicker than most I have seen. Anyone recognize the label (what's left of it!). Any idea on brand? Paid 350. May change the oil and sharpen the blades. No play in the gear box but hope there is oil and not water.