When I back drag bucket with down force the left side of frame makes a sound like something breaking. Has I look it over the frame upright is bent where if pivots. Des anybody else have this problem. Tractor as 133 hrs on it.
L3901 loader frame
- Thread starter pete75
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
dirtydeed
Well-known member
Lifetime Member
Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Check all the mounting bolts on the frame and loader. My NH had a bolt shear off right where the loader frame mounted onto the tractor chassis. I heard a loud pop when it went as I was carrying a load in the bucket. PITA to fix.
bcbull378
Member
Equipment
GL3830,fel,brush hog,pallet forks,disc,gannon,auger,springtooth,plow,drag,ripper
So tell me how did you go about repairing the broken loader frame bolt ? I’ve had 2 shear off over the last 8 years one I was able to get the bolt out . Then drilled out the hole tapped out the hole installed helicoil . The second one I can get the broken bolt out and it won’t drill out . Thanks for any info you may have ....Dan
Maybe able to weld a nut to the broken bolt. I bought some rods from Exergon will have to check the numbers they are called extraction rods. I have had great luck with them most recent was removed a exhaust bolt on my 6.0 gas broke off flush in a aluminum head
