Stomper
Member
Equipment
2017 L2501. Landpride Mower. Farm King Snow Blower. DIY Root Bucket grapple.
I just finished building the below ssqa frame for a small stump bucket I am building. It's pretty beefy because I just used what I had laying around so it hasn't cost me anything. The square tube is 4"x4"x1/4" and everything else is also 1/4" material, so it should hold up to any abuse my little kubota L2501 can give it. There are a few other attachments that I would like to have which I will eventually build. Such things as a boom pole/jib and what ever else I can dream up to build when a job dictates a specific attachment/tool. I have been eyeballing the SSQA back hoe also. With not wanting to build a quick attach plate every time I make a new attachment, I have come up with an Idea I am going to try. The four small white circles on the cross tubes in the one picture, will be holes with crush tubes welded in place. The crush tubes will be big enough to accept 3/4" bolts. The idea of the whole thing is to only have one quick attach frame and to be able to bolt on several different attachments. Being that my tractor is small and can't dish out too much abuse, I see no reason that this shouldn't work. With this frame and 3/4" bolts i don't think there should be much of an issue. Time will tell. Feel free to give me your opinions and/or any ideas that might save me some grief in the future.
Attachments
-
49.5 KB Views: 750
-
41.1 KB Views: 714
-
91.9 KB Views: 691