L1802 Front Axle Pivot Mount

[KennethH]

I am rebuilding a L1802. I removed the front axle and was looking at the mounts that mount the axle to the frame. Does anyone with a L1802 have a parts breakdown of the mount on the rear side? I'm looking at the seals and thought I may replace them.
Thanks

 

[billrigsby]

Here is a link to the L235 Operating Manual,
which should be the US equivalent I believe.


https://www.dropbox.com/s/ynz9phehdy4sfhn/L235-L275%20Ops.pdf?dl=0

This is a link to the L275 Parts manual which may be the same/similar

https://www.dropbox.com/s/omynxc1qffy4d4b/_L275%20Parts%20Manual.pdf?dl=0

This is a link to the L235/275 Workshop Manual.

https://www.dropbox.com/s/d4oh8n8wlg18bl7/WSM%20L185-L235-L245-L275-L285-L295-L305-L345-L355.pdf?dl=0

 

[billrigsby]

A good source for a parts list is Kubota....

http://kpadweb.kubota.co.jp/kpad2/PartsInfo.do?bookCd=100K0350&funcCd=&figNo=&himban=&dispType=0

Here are the front axle parts

 

[KennethH]

Thanks for the help guys. I have these parts manuals also and the L235 matches up in many cases, but the L1802 has more or a frame then the section that bolts to the engine. I may buy some of the seals shown in hopes that they are the same.

 

[billrigsby]

Thanks for the help guys. I have these parts manuals also and the L235 matches up in many cases,
but the L1802 has more or a frame then the section that bolts to the engine.
I may buy some of the seals shown in hopes that they are the same.

How about the L2350DT?

From... http://www.messicks.com/ku/85272

 

[KennethH]

That is exactly it. Thanks for the help.