BX24 trans drain plug size

[wepaddle]

Can anyone tell me what size socket fits the transmission drain plug on a BX 24?
Thanks

 

[sagor]

Hm, no specific size mentioned in the manuals (owners and workshop) for my BX25 (BX24 is about the same). I would suspect it may be a 14mm or a bit larger.
Anyone owning a Kubota should have a metric socket set anyway

 

[wepaddle]

It's a bit larger. My set goes to 21mm and its bigger then that. Maybe 23? I want to make sure before I buy one.

 

[lugbolt]

24mm or 15/16".

 

[sagor]

24mm or 15/16".

Boy, was I off on my guess. Obviously I've not been draining the trans oil this year (but I did change the trans. filter...)

 

[maclean]

Don't forget new crush washers...

 

[wepaddle]

So I went to change the fluid this past weekend and the 24mm socket didn't fit the drain plug either. So I tried a 15/16 as Lugbolt suggested with the same result. It's crazy how big this plug is. Anymore thoughts on what size it might be?

 

[rentthis]

Can you get to it with a crescent wrench?

 

[D2Cat]

Rentthis, do you mean an open end adjustable wrench? There's Proto, Stanley, Channellock and a few others. D

Just messing with ya.

 

[rentthis]

Don't forget "monkey"

 

[maclean]

1 1/8" if I recall correctly

 

[rsr025]

Can anyone tell me what size socket fits the transmission drain plug on a BX 24?
Thanks

I just changed the hydraulic fluid on my 2021 BX2380. The drain plug on the bottom of my transmission took a 27mm socket.

 

[TheOldHokie]

I just changed the hydraulic fluid on my 2021 BX2380. The drain plug on the bottom of my transmission took a 27mm socket.

27mm = 1.063" = 1-1/16"

Dan