Kubota M 8200 pto clutch

[dusan]

I have a 1999 kubota M 8200 and pto clutch is slipping . Pressure gauge is reading 400 psi, it will turn the pto but there is no power. Do you have to split it apart to install PTO clutch on tractor or can you do it from the rear? Thank you....

 

[North Idaho Wolfman]

The PTO clutch pack is in the center of the transmission, so yes you would need to split the tractor in two in order to replace the clutch.

 

[dusan]

The PTO clutch pack is in the center of the transmission, so yes you would need to split the tractor in two in order to replace the clutch.

Thank you. That's what I have found out reading manual.


Sent from my iPhone using Tapatalk

 

[dusan]

Thank you. That's what I have found out reading manual.


Sent from my iPhone using Tapatalk

After splitting the tractor and rebuilding the pto clutch and controler the pto won't shut off. Need to check the correct pressure on controler? Thanks

Sent from my iPhone using Tapatalk

 

[dusan]

After splitting the tractor and rebuilding the pto clutch and controler the pto won't shut off. Need to check the correct pressure on controler? Thanks

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk