Rck60b23bx

[laketractor]

Changing the gear case fluid on the top of my 60" MMM is a messy pain in the butt. Anyone have a suggestion to make this easier?

 

[North Idaho Wolfman]

Did you pump it in or try and pour it in?

I have a few pump and tube set up for just such tasks.

 

[skeets]

pull the plug onthe side and a small funnel when it starts to come out the side hole your full..If you dont and fill it up, when it gets hot,,,

 

[lugbolt]

I suck it out, but I bought an evacuator, or more specifically I built my own version of one using their parts before the metal ones were available. Takes about 15 seconds to suck the oil out.

Turkey baster with a small piece of fuel line attached works pretty good too, but takes longer.

 

[L4740]

I put a chain on it and lift it up vertical with my loader. Then position it so that it leans back so when I pull all the plugs it drains into a drain pan.

 

[Ortimber]

I put a chain on it and lift it up vertical with my loader. Then position it so that it leans back so when I pull all the plugs it drains into a drain pan.

My thought too, you beat me to it.