Price on a factory-ordered M7060

[New2Kubota]

After much tough, tough negotiations (and the help of the factory rep's "bag of magic"), we are at $32,000 for a to-be-ordered factory fresh M7060 open station, 4x4, 8 speed, cast wheels, rear work light, loader and grill guard.

Is this a decent price? Best deal of all bids so far.

Opinions please. Thanks.

 

[MtnViewRanch]

What will your tractor be used for? This can make a HUGE difference as to what all you should be getting as options.

I personally would be getting the 12x12 transmission, 3 rear remotes, 2 with the float feature, hydraulic self leveling loader, 3 sets of rear wheel weights, all the front end weights.

But that is just me and what I would be using the tractor for. Everyone's needs are a bit different.

If you want to know if you are getting a good price, go on the Kubota website and build the tractor that you want, how you want it. Then take off 10%-15% of the list price and you will have an idea of what a good price should be for what you want to get.

 

[New2Kubota]

Thanks for your input.

I built the tractor we discussed and I'm at 78% of suggested MSRP.

 

[Orangeinalaska]

I have been pricing out the M7060 with a cab here in Alaska and I would say that your price is very good. I have called other dealers around the states and the Alaska dealer is very competitive if you consider the shipping cost. Plus it will be nice to know I will get better service from the dealer if I buy from him.

If you plan on running any front loader implements I would get the third function option.

I am going in to finish the order next week. Delivery will be about 3 months out.

 

[MtnViewRanch]

Thanks for your input.

I built the tractor we discussed and I'm at 78% of suggested MSRP.

So since you did not say what the tractor will be used for, and you have built it out as is, I can only assume that it is built exactly how you want-need it to be. So at 78% MSRP you have a great price and should make the purchase.


Good luck.

 

[New2Kubota]

Thanks--just using for general CRP maintenance and loader work.