Parting out Kubota B5100E. Snowblower complete

[Smagner234]

I have a fully operational Kubota B5100E that I am parting out. I had bought it for some parts for my B5100 and no longer need the rest. Let me know what you need.

I also have a front mounted single staged snow blower for it that I would like to sell as well. Let me know if you are interested and I can send some pictures.

 

[sscooter]

Re: Kubota B5100E and Snowblower

I have a B7100 HST that is in need of some cosmetic parts... Should be the same as yours or close enough for me to make work.

1. The little chrome Kubota "Bull" emblem/plaque that sits between the headlights
2. headlight bulbs/holders and wiring harness
3. speed control knob


4...finally, if the two engine side covers are the same as my B7100, I might be interested as well.

Thanks!

 

[boulderz]

Sent email, I'm interested in the lower grill if same as B6200

 

[Smagner234]

Re: Kubota B5100E and Snowblower

Sorry for the delay I was having trouble logging in.
I do have a bull emblem, the problem is that 30+ year old plastic does not react well with the metal studs used to hold it to the hood. So I do have one but you would have to epoxy the studs back into the emblem. Let me know if that works.

I have the harness and holders, bulbs too but I would replace them. make me an offer

If speed control knob is the throttle knob for the engine then I have one listed on ebay listing number 322305871688. I also have a whole bunch of other stuff too.

I do also have the side covers, I would assume they would not fit but perhaps someone with more knowledge on this site would be able to answer that.

I hope this helps

Scott

 

[Smagner234]

I do have the grill and radiator for sale on ebay listing number 322328053995

I also do not think that the grill will match up but again I think someone on this site might know better.

Hope this helps,
Scott

 

[BWXT]

Hello. I am interested in the snowblower if it is complete with the clutch. I am in western CT and could pick it up. What are you looking to get for it? Couldn't see where to send a PM, but feel free to send me one if you know how! Thanks!

ETA: PM sent!

 

[Smagner234]

Hi I have sold the pto clutch but I do have the blower and lift cylinder I would like $150 for that. It's in overall good condition but it would need a good lubrication prior to use. I also have a brand new danfoss valve that I would sell for $150 (these are obsolete and are very expense and hard to find, I paid a lot more than $150 for the valve).

 

[BWXT]

Hi I have sold the pto clutch but I do have the blower and lift cylinder I would like $150 for that. It's in overall good condition but it would need a good lubrication prior to use. I also have a brand new danfoss valve that I would sell for $150 (these are obsolete and are very expense and hard to find, I paid a lot more than $150 for the valve).

Can you PM me a number so we can talk? Thanks

 

[Smagner234]

Update
The snowblower is sold. A lot of great parts remain

 

[BroncoRN]

Update
The snowblower is sold. A lot of great parts remain

Do u have hood? Decomp cable and knob?

 

[Smagner234]

I do have the cable and knob, it's posted on ebay. I sold the hood already sorry

 

[BroncoRN]

Do you have a link to item?

 

[Smagner234]

Here is the item number, if you place this in the search field it should come up
322373161211

 

[BroncoRN]

Do u have hour meter?

 

[Smagner234]

Sorry it's sold

 

[koinz]

Hi Smagner, My son has a B5100e and the front transmission input shaft is leaking. curious what parts you have available. ours is 2wd, so it might make a difference.

 

[Smagner234]

Hello
The tractor is also a b5100e and the whole transmission is still there and available. Pm me and we can talk about what you need.

 

[BroncoRN]

Do you have 3 point hitch ??

 

[joebutler]

Hello, I am searching for upper right lift arm for a b6100, do you know if they are the same as the b5100 arms

 

[Smagner234]

Hi I have sold the arms for the b5100 but I do have a set for a b6000.
Not sure if they cross but I'm confident someone on here would know. If they will work then they are available. Please let me know if you would like them. I will sell it for $40 + shipping, which will be $7.20 flat rate usps.