Kubota Rims

[Paul]

Does anybody know where I can get front rims to fit Kubota B7000 DT or if there is a part # from a North American dealer of Kubota that will fit?

Much Appreaciated!!

 

[gabster25]

And how much for 2 rear B2710 rims??

 

[gabster25]

What about for R1 ag tires?? And how do I get ahold of you?

 

[reinaldo]

I think you should visit carparts.com.

 

[luthernil]

If you're looking for rims that will fit your Kubota B7000 DT, I guess it will be a good idea to visit JCWhitney. Here are the samples of Kubota Parts that they are selling.

 

[mikefpa]

Hello, I'm looking for parts for a f2100 diesel. Rear wheels for starters.

 

[Odekolon]

I have one set of used rear rims (13.6-16) and one set of brand new rims with brand new turf tires installed on them. Email to odekolon@ymail.com

 

[uncle jed]

Mikefpa, what size wheels? on the F2100 the ones on the steering axle are the same size as on golf carts {8"} with 4" bolt spacing the wheels on the front of the F2100 are the same size as most five lug garden tractors 12" with 4.5" bolt spacing

 

[tiredguy]

I'm with Vic on this subject, unless you find a used set or are very well connected with a mfg that can make the proper centers you're pretty wel SOL.
And his way most likely the least expensive way to go too.
Al
PS: most Kubota wheels of the same size have totally different bolt patterns and the interchange between models almost zero.

 

[Rustbucket]

Can anybody advise if 3103-2003 10-24 wheels have the same stud pattern as 67800-50120 8.3-24 ? What about the web offset?

I may have a lead on a pair of these NOS. The closest dealer wants the equivalent of almost US$500 each for 67800-50120.

Thanks for any help!

 

[Rustbucket]

Cancel that. I've just seen a picture, and they're 8 stud wheels.

Looks as though the advice given by tiredguy is good!!

 

[cmorningstar01]

Gemplers carries a selection of wheels which may fit your particular application.
Here is the direct link to the ag wheels page

http://www.gemplers.com/shop/ag-wheel

 

[Rustbucket]

Gemplers carries a selection of wheels which may fit your particular application.

Thank you for that tip - I've sent them an email enquiry, but I suspect that the shipping costs may be prohibitive. I'm also putting out feelers with the Chinese compact tractor dealers - they might have spare wheels of the right dimensions.