New BX2370

[Mr Orange]

I picked up a new bx2370 this past weekend. I got the loader, 60"MMM and a rake. I only got to use it about 1.5 hours this past weekend. I have a couple kids in daycare and the whole family was sick.

Anything I need to know. I know to grease all the zerks and the 50 hr service. As far as break in, just not run it at full throttle? For how long though? Is it ok to mow at less than full throttle?

Any tips, or suggestions? I came from a Deere garden tractor. It is nice to have a tractor that is made out of metal.

 

[85Hokie]

I picked up a new bx2370 this past weekend. I got the loader, 60"MMM and a rake. I only got to use it about 1.5 hours this past weekend. I have a couple kids in daycare and the whole family was sick.

Anything I need to know. I know to grease all the zerks and the 50 hr service. As far as break in, just not run it at full throttle? For how long though? Is it ok to mow at less than full throttle?

Any tips, or suggestions? I came from a Deere garden tractor. It is nice to have a tractor that is made out of metal.

Grease as often as you want, book says every ten hours......i try to do mine a little more often, when greasing, try to hit the pump once or twice only, otherwise you have a mess on all the zerks....btdt!

break in should vary rpms, dont run it too low, I would not run anything under 2k and nothing much over 3k for very long, cutting grass at 2.4 - 2.8 k is perfect - depends on the hills and the grass height.

Steel is only one thing you will find to love about Orange!