I was using my Kubota 3430 the other day and It just quit running, It sound like it was empty so I checked the fuel filter and there was some sediment crap in the bottom, so I changed the filter, cleaned it out and turned the petcock on and let the air escape before tightening it back, now It wont start.This tractor has run perfectly until this, also any advice on bleeding injectors, if that would help, any help is appreciated.
changed fuel filter, now wont start
- Thread starter eddiedial
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Just crack open the injector lines on the top of each injector, crank until fuel comes out of every fitting.
Thanks Wolfman, took 2 times to get all the air out, but that took care of the problem.
Thanks
For me, i found turning the fuel valve BACK ON made a huge difference. <sigh>
Sent from my DROID RAZR using Tapatalk
Sent from my DROID RAZR using Tapatalk
ROTFLMAO!!! 
Been there and done that, not turning the fuel back on. Glad I am not the only one to forget this!
Russ 65
Been there and done that, not turning the fuel back on. Glad I am not the only one to forget this!Russ 65