Rob
Member
Lifetime Member
Equipment
B6000DT / B7100DP /B8200DT/L225/Globe PTO Chipper/Lewis Backhoe/huxley TR66
Whilst i was thinking about the setup of my FEL the thought crossed my mind about 4 in 1 loader buckets.
I've seen plenty on mid range compact and larger but nothing on small kubotas.
Now i know the B6000 is what you can call "small", but i cant see any reason why a 4 in 1 can't be used provided it is sized sensibly etc taking loading and unloaded weights etc. Also if the right hyrdaulic setup is used there should be no problem powering the extra rams.
Any tried and succeeded in making one, or better still know of a good company that make them, i dont mind a challange so self build would be cool.
any advise and tips i should know about in advance before i get further into this.
After all, front loaders are so usefull and a 4 in 1 would just enhance things and give me whole new range of opportunitys.
rob
I've seen plenty on mid range compact and larger but nothing on small kubotas.
Now i know the B6000 is what you can call "small", but i cant see any reason why a 4 in 1 can't be used provided it is sized sensibly etc taking loading and unloaded weights etc. Also if the right hyrdaulic setup is used there should be no problem powering the extra rams.
Any tried and succeeded in making one, or better still know of a good company that make them, i dont mind a challange so self build would be cool.
any advise and tips i should know about in advance before i get further into this.
After all, front loaders are so usefull and a 4 in 1 would just enhance things and give me whole new range of opportunitys.
rob