gpreuss
New member
Lifetime Member
Equipment
L3200DT w/FEL, K650 Backhoe, 5' Rotary, 40" Howard Rotavator, 6' Rhino blade
This is all great advice! I was using a snatch block with the winch - in truth it was not up to the task at hand. I need a heavier winch. I also clamped a 2' x4' piece of 3/4" plywood to the ROPS to protect the operator of the tractor (my son) in case something broke.To all newbies. If you have not been stuck real bad, you have not lived yet. But, plan on it so you can make it less painful. Assuming you have anchorage in the area (such as strong trees), block and tackle equipment can save the day. Be aware that nylon rope with snatch-blocks is then like a major sling-shot. Chain breakage at the stuck tractor can fly a long ways, so paint them yellow or orange to aid in finding them. Make sure standers by are aware of the dangers. It pays to have cleat-like fittings on the puller vehicle if you are using nylon ropes. In the Navy the rule was "Never stand in the bight of the rope". Bight means the "U".
Nylon rope is a really poor choice for a block & tackle - it stretches way more than other ropes, and can make a powerful whip-lash when it breaks, in addition to putting metal fittings into orbit!
An interesting story - about 15 years ago they were building a large ship in Spain. The ship was pretty big - about 900' long, 100,000 tons displacement. They tied it up to the pier with a 50/50 mix of wire rope and nylon line. A storm came along. The wire rope does not stretch, and was only half enough to hold the ship, so it broke while the nylon was stretching. Then the nylon was only half enough to hold the ship, so it broke too. The ship then charged over to the only bridge across the bay, and took it out, forcing traffic to take a 40 mile scenic route around the bay for a year or so.
Thanks,
Gil