which filter where

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
OK, the dealer gives me two filters for the hydraulic/tranny unit for my new b3200. Filter numbers show #hh660 and #hh670 .How do you tell which filter goes where ? Love my new b3200 but the service manual is not simple clear.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,125
6,299
113
Sandpoint, ID
OK, the dealer gives me two filters for the hydraulic/tranny unit for my new b3200. Filter numbers show #hh660 and #hh670 .How do you tell which filter goes where ? Love my new b3200 but the service manual is not simple clear.
I don't think you will be able to mix them up, the size of the threads should be different.;)
HH660 is the HST filter
HH670 is the Suction filter
 
Last edited:

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
I don't think you will be able to mix them up, the size of the threads should be different.;)
HH660 is the HST filter
HH670 is the Suction filter[/QUOTE

Thanks for the help. I never thought of looking at the threads. Sooner ot later my dealer going get tired of my phone calls. So going use the forum more at the risk of the experts on here seeing how inexperience I am about working on the tractor. Dealer do far is really cool with my calls, but the forum is more fun. Now why could they not write suct . and discharge on the filters lol.....
 

ibunker

New member

Equipment
B3300SU w/BK76, Box blade, DR wood chipper
Dec 5, 2010
52
0
0
Port Orchard, WA
HH660 left side, not much oil will escape, do this at 50, 200 and 400 hours. HH670 right side, removing this will drain most of tank, no 50 hour service, only at 400 hours, also at 400, hydraulic fluid replacement along with transmission strainer cleaning.
 

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
And you read my mind, about oil leakage as I swap out the filters. Thanks for the info...Just have to love this forum.........
 

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
I don't think you will be able to mix them up, the size of the threads should be different.;)
HH660 is the HST filter
HH670 is the Suction filter
after taking them off i notice one has a recess bevel face, and the other is crowned face, so like you pointed out, probally cannot mix them up. Thank you for your help....
 

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
HH660 left side, not much oil will escape, do this at 50, 200 and 400 hours. HH670 right side, removing this will drain most of tank, no 50 hour service, only at 400 hours, also at 400, hydraulic fluid replacement along with transmission strainer cleaning.
thanks for the head up, I was prepared as per your tip. Dealer said, " o some will come out, put clean pan under filter and reuse it". Dam, some was not right word, it gushed out like you said on right side (3 quarts ). I just put new oil in , could not bring myself to put use oil back with new filters. Thank you for the heads up