Daily Chuckle

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,410
5,763
113
Chenango County, NY
I readily admit pinching two saws in a corkscrew soft maple after I dropped it. 45 years ago. Very embarrassing, but did have another bar and chain to finish the job.

Three bars in a standing softwood makes me think he was trying to overcome too much lean and it crushed down on the bar(s)?!?

Might need to cut a pocket in the back cut side for a hydraulic jack.
 

Daren Todd

Well-known member
Lifetime Member

Equipment
Massey Ferguson 1825E, Kubota Z121S, Box blade, Rotary Cutter
May 18, 2014
10,284
6,936
113
Vilonia, Arkansas
I readily admit pinching two saws in a corkscrew soft maple after I dropped it. 45 years ago. Very embarrassing, but did have another bar and chain to finish the job.

Three bars in a standing softwood makes me think he was trying to overcome too much lean and it crushed down on the bar(s)?!?

Might need to cut a pocket in the back cut side for a hydraulic jack.
We had a large oak the got split from around 2ft off the ground up to around 40. The split went smack dab through the middle and you could see daylight.

My father in law brought over his old dodge. We hooked the winch up to the tree, and as I started cutting.

One half dropped as I cut through it and pinched the bar.

Neighbor brought over his saw and did it again 🙄🙄🙄
 
  • Haha
Reactions: 1 users

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,829
3,025
113
North of Pittsburgh PA
IMG_4993.jpeg


Edited slightly as I thought it might push the limits…a friend sends me these things occasionally. Up to you to complete the sentence. :ROFLMAO: