New profile posts

Not being a paid advertiser on Orange and Green Tractor Talk, I have to be careful of what I say.
Best thing to do is fill out the Fit Rite contact form and we can go from there.
At least I can get you some costs to consider.

Thanks for your great information (about my T1400H wiring) I tried to reply, but something screwed up. Just wanted to be sure I said thanks! Steve

Just planning out the ZD331LP Turbo grassrod At 161.0 on the clock it wants to overheat after 20-30 minutes run time. Belt is about 10 yrs old n worn. Replaced it with a slightly longer one to accommodate a real alternator. Why not power some lights to mow at night so it gets more than 12 hrs a year on it. There is enough power left to run a fan after all that booger man repellant was installed. Not a rad fan. No way. A pair of 7” for the intercooler mounted right under the custom hood scoop. The cooler charge will surely solve the over heating issue. Boost cures all ailments

B2650hst rops safety switch locations? I know of under seat, two under seat compartment near hydraulic motor, and 1 by hst pedal for neutral. Any missing?

machine starts and runs but can't put in gear forward or reverse without the motor dying

Switch to a different browser. I use Brave and it blocks almost all of the ads. Give it a test drive and see if you like it.

Hello l have a kubota l35 blows the slow blow 40 amp fuze when turning key isolated all my relays looked for bare wires still can’t find anything any suggestions would be appreciated

hello. Been a while. Just added an L3650 to keep my G6200 company. Very cool and powerful tractor.

Bought a new TMG TFM-060 and put it to work this last weekend. I had some reservations about buying a cheep flail mower, but it held up well despite the multitude of rocks that I found on the unmaintained pasture.

Would you happen to have a ”joint” per kubota, for a L2950 part number 36830-63210? It connects to power steering hydraulic line to the “rack and pinion”. MBtractor let me order then canceled. Also kubota says it is discontinued without a replacement.

I did make the deal, I will get pics posted soon.

jut reaching out to you on a question , was this a open or closed center valve

Hi, my kubota mower has states looking power after about 40 minutes of mowing . After a break seems to
Recover amd will do another 40 is minutes . Also when this happens here some grinding kind of noises from engine
Thén these too disappear after a break. Have check angina and hydronic oils, both ok. No signs of over heating,
, now what

Hi. I'm new to the tractor game but enjoy hands on. I have a l3901 with a la525 loader. I'm hoping to verify the color coding for the hydraulic connections on the front loader. I replaced the hoses and don't entirely trust my memory. Thanks in advance for any help.

Is there any chance I could buy one of those auxiliary blocks off of you I’m done withe front hydraulic pump lol

Ken, I am a fairly new B2601 owner, and very new to Orange Tractor Talk. I joined because I have a problem with the Kubota Treadle direction control.
It is causing me a great deal of pain in my right leg, The problem, I think is reversing and applying necessary pressure on the rear of the Treadle.

In October 2024 you showed a picture of your control lever but from the left side of the tractor. I am trying to design a similar control and would appreciate a close up picture and comments of the connection between the treadle and the vertical lever.

Going forward does not seem to be a problem, but reverse sure is. I am walking around limping with pain in the rear thigh.

Thank You

Fred Musser
mail@firesafetytech.com










2foire

I doubt you will see this message but I will try anyway. I have a KX41-2 question. If you answer I will ask it. Finger's crossed here...Bill in Pittsburgh, PA

is there an alternative HST oil to use for a ZD323 diesel

Looking for help with a l245dt overcharging I have replaced the alternator, regulator, new wiring I also have check grounds! I have run a temp ground from regulator casing to the negative terminal battery terminal. Still
Overcharging. 15.6

Looking at a 2022 ZG227 with only 49.2 hrs.
2-3 acres twice a month for 8 months a year in Fl.
Will be due for 50 hr service if bought.
Paid $9800 asking 7500 then 6000 I offered 5k and said come get it.
2 hr drove. Owner died or so they say.
Have JD M655 Zero now and like it but getting old.
How are these holding up? My understanding is the biggest machine before going to diesel?
They say this is the "overlooked" model?