New profile posts

Hi orange fred,
I responded to your message on my home page in more detail. But they limit you to 1000 characters or less in that format. A "start a conversation" message works much better.

Feel free to respond to this message with more questions.

Or better yet, feel free to message me at my regular email address: dbratager@midco.net

I have covers available for your L6060.

Let me know what you think after seeing the other reply to your first message to me.

And thanks for your interest in these covers!!

Regards,
David Bratager
Grand Forks, ND 58201

Je suis intéressé par un jeu de housses d'hiver pour mon L6060. Pourriez-vous me contacter pour connaître la procédure de commande ?

Here is a shop manual

good morning, i have a mower, ZD-1011, with a D782 kubota engine that is no good due to cracks on the head valve, however i do have a D1005, thats i just rebuilt , can any one tell me if i can use my D1005, and replace the D782 , any major chances that i might face? any feed back will be much appreciated,

PoTreeBoy... I'm trying to replace the Key Stop Timer/Relay on my L35 and having trouble removing the instrument panel. IC it's connected at the back, but can't reach in there to release it. I may be off course as I'm guessing that the timer is under the instrument cluster. I'm hoping you can give me some guidance. Thank you. Doug in Brookings,OR k7ky@ferrycreek.com

New to Kubota products. Recently purchased a 2023 Kubota 1100C UTV. Wondering how folks are treating their diesel fuel in the winter ( Catskill Mtn. foothills for me ). Kubota dealer parts guy told me the other day that he adds 1/3 kerosene to diesel anti gel treatment. Sounds good to me. Any comments or suggestions? Thanks.

Back on deck after some major cardiac surgery. My plumbing now works fine!

Hello sir,

I am trying to find the front bumper for a model 1200 FEL on an L285. Any chance you have one?

Thanks,

Kevin

Hey there Chris
I just saw your post about switching you bucket attachment to a SSQA on a B2650/B3350. Thank you that was very informative. I have a B3300SU that i want to convert to SSQA. Everything i have read tells me the B2366 coupler will work for that tractor also. I just called my local Kubota dealer an pulled the trigger on ordering one. They said it was on back order till the middle of November so i am waiting....

L355SS when i put it in low range it will move but as soon as it has any load on it starts to grind like its not staying in low,high range works fine??

Buying my first tractor. Leaning towards MX 5400 HST

Received my new acreage toys this past Friday. B2601, LA435 loader with quick attach and 3rd function valve, 54" bucket with bolt on cutting edge, SGC0660 grapple, bh70 backhoe with 16" bucket and thumb, rta1258 mulcher, bx2822a 55" heavy duty snowblower with K connect. Also a Z252KW 54" zero turn mower. Have a Woodland Mills WC68 wood chipper on the way. Likely going to order the Woodland Mills WG24 stump grinder. Also trying to decide on a 5' vs 6' rear blade for my grading my driveway which is about about 1000' long.

Hello, I have problems with the glow plug on my Kubota B6000 tractor. The glow plugs are glowing but the indicator is not glowing. What is the reason? What kind of generator is used to replace the dynamo?

I am interested in pedestal

Bulldog a saw that you responded to a post about a type of loader for B7100. I have the same issue with mine.
I can’t seem to figure out how to upload the pictures of my tractors loader. But what I can tell you is that the control lovers are small and or directly behind the arm, which has a fill cap for the hydraulic fluid.

I'm looking for a copy copy of the B26 service manual...Gary

Learning about my new BX23S

I finally finished this thing. I was able to locate the last bearing/bushing, metal crank pin #1 in Australia of all places and got In. & Ex. Valves from them as well. The parts were Japanese but not necessarily Kubota so im unsure but they were quality parts. I sourced a new crankshaft, used rods almost locally and all the seals, gaskets, pistons, ring packs main bearings, rod bearings and bushings from good ol' Messiks. I installed new valve guides, reamed them, I re-cut the valve seats, new valves, glow plugs, and re-sealed the chassis so there's no mess when its parked. I was also able to find NOS fuel camshaft kit on eBay. The sleeves on the other hand were no more than .0002" out of round. I was absolutely blown away at the fact.

There is alot about this site I don't understand. I have not been very regular about signing in.
I have gotten some good info. Just posted a note about my "growling" right rear B3200.

I just bought a 2025 L4060 HSTC to replace my 2000 L4310 HSTC. This tractor is taller than the old one. It is a long stretch for my old legs to the step. Any way to replace the step with a lower step or even a two level step. There is a company that makes a two level step but not for a cab tractor.