New profile posts

I bought a hydraulic pump for my B8200hst tractor and found when it was delivered I bought the wrong one. Do you happen to still have a left rotation pump?

I am trying to get a shipping quote from Valley Cartage, but they need name and delivery address. If you are still interested please send your contact information. Thanks.

BTW: As I mentioned in the original post this valve will run the "UP-DOWN" function on the BX2200 snowblower but it does not have enough hydraulic connections to run a front end loader (FEL).

I have a Kubota T2290KW 42" with a mulching kit and I am attempting to reinstall the mower belt which came off while going over a bunch of branches. The manual is not very helpful. My question is when reinstalling the mower belt ,does the belt get installed between the pulley and the guide pin or does the belt get reinstalled on the outside of the guide pin. Please help!!!!!@

Trouble withB7200 4WD
Over past several months 3 point hitch getting weaker and not going as high. 3 point will also not stay up and leaks down, Fluid good and screen clean……tractor 35 years old….pump going out and bypassing internally ? Suggestions
Tomt

great remedy to buying a new tractor. Have you come up with a price and or a video to do the install including you're parts?

Just acquired a G1800.

Have purchased all of the parts to replace everything connected to an overhaul of the the Loader Lock Lever. What do I remove in order to gain access to the guts of the Lever on this 2007 L 4240 D HST with LA 854?

The loader joystick works fine until the valve lock moves from being in the unlock position and then the joystick resumes working again.

szia, Kubota b6000 probléma. alapjáraton kéken füstöl, ha nem állítom be a dekompresszor csavarját a ventilátor oldali szelepen. de ha úgy állítom be, hogy kicsit hozzáérjen akkor nem füstöl kéken. se olajat, se vizet nem eszik. új karburátorokat adagol. szelephézag beállítva. mi lehet a probléma?

still here still playing with my b7000 and the B7100 trying to find the right gauge for the battery cables the old ones are worn off too much to tell

I am looking for engine panels for a L3010. Would you happen to have or know where I can find some ? I don’t want to purchase new. Thanks

Last week was a productive one. After rehabbing neighbor's long neglected Greenline PhD, I learned to use it by punching 24 holes in my orchard. Was happy then, but it got better when neighbor gifted me the implement because she had no need for it (ex-husband bought it, used it a couple times and it sat for years. Reinstalling U-joint guards, and installing the new shaft sleeve and she'll be in great shape.

Is this tractor and implements available? What is lowest price you will take? Would be coming from Titusville, Pa

Former Orange person in ‘90s to late 2008. Restarting a business I love. Love my Orange. Just purchased used B3350. Now find out all regen issues. Worried

Hi Tughill Tom,
Are you anywhere close to Carpenter Road and the Timberview Resort? We try and ride the Honda Pioneer side by side up there at least once a year.
We like to ride the side by side on the seasonal roads up on top of the plateau. It's very scenic there.
The tornado near Turin several years ago sure left a pretty good stripe of destruction up there!
I'm several hours south/southeast from you and live outside Norwich, NY. (Norwich is about an hour south of Utica on State Route 12)
Anyway, it is nice to see semi-locals here on OTT.
I met OTT Member "RCW" last week in person.

BX25D Rookie

Do you still have the manual for the bf350a loader that you would be willing to share?

I have a B21 that gets weak after about 5 minutes of running, have replaced almost every Oring on the machine, and rebuilt all my cylinders,(they were due) also new S tube and Oring...

Still trying to keep the TG1860 going even with starting issues and HST speed control issues.

What is the proper hydraulic filter for Kubota L1802?

I just read the post you did on upgrading your alternator. Due to medical reasons and living the the south , I’m adding a Curtis cab to my b2601 and need 60 amps for ac. A retired Kubota service mgr said to buy a one wire alternator and increase the wire size from the one post to the starter and remove the bulb from the charging light in the dash. Am I missing something on the 2 wires you mentioned .? Could you email me some better information and pic’s please, I don’t get notifications of posts on here anymore. Thank you , Chris. Chris@charlottebackflow.com