New profile posts

Hi there,
Have a good day.

This is Joanna from Hebei Changnuowei Machinery Co., Ltd, a professional Quick Couplings manufacturer over 15 years.
Our main products:

Hydraulic Hose
Hydraulic Quick Couplings
Camlock Couplings
Hydraulic Valves
Other Related Products

Contact with me for more details and welcome to visit the factory at any time.

Thanks & Regards,
Joanna

Hi Tughill Tom,
Are you anywhere close to Carpenter Road and the Timberview Resort? We try and ride the Honda Pioneer side by side up there at least once a year.
We like to ride the side by side on the seasonal roads up on top of the plateau. It's very scenic there.
The tornado near Turin several years ago sure left a pretty good stripe of destruction up there!
I'm several hours south/southeast from you and live outside Norwich, NY. (Norwich is about an hour south of Utica on State Route 12)
Anyway, it is nice to see semi-locals here on OTT.
I met OTT Member "RCW" last week in person.

BX25D Rookie

Do you still have the manual for the bf350a loader that you would be willing to share?

I have a B21 that gets weak after about 5 minutes of running, have replaced almost every Oring on the machine, and rebuilt all my cylinders,(they were due) also new S tube and Oring...

Still trying to keep the TG1860 going even with starting issues and HST speed control issues.

What is the proper hydraulic filter for Kubota L1802?

I just read the post you did on upgrading your alternator. Due to medical reasons and living the the south , I’m adding a Curtis cab to my b2601 and need 60 amps for ac. A retired Kubota service mgr said to buy a one wire alternator and increase the wire size from the one post to the starter and remove the bulb from the charging light in the dash. Am I missing something on the 2 wires you mentioned .? Could you email me some better information and pic’s please, I don’t get notifications of posts on here anymore. Thank you , Chris. Chris@charlottebackflow.com

Hi Dave,
From reading one of your psots it seems you might ahve a pdf copy of a manual for an L185.
My partner in France has just bought one. I am back at home in jersey now.

Any chance you could send AnneSophie and myuself a copy of the manual please?



neil@paisnel.je
asl2008@btinternet.com


many thanks

Neil

My v1505 will crank but no start help

I have recently installed at Hyd Chute Kit on my BX2350 tractor - snowblower BX2750D. Every thing seems to be working fine, however I was wondering what I should use for lubricant for the gear and gear segment that rotates the shoot, light general purpose oil or a light grease?

I have a Kubota L185Dt model 1100 and needing a rear rim 9.5/24. Can you please tell me I can find one?

Hi, Lugbolt said you do a lot of instrument cluster repairs. I have a 2004 GMC and it had a remanufactured unit in it when I bought it used over2 years ago and have replaced it twice. Do you hire out?

Hello all, new member as of 15 Feb 2025, new tractor owner (M62), lurked around on this site for years, figured i'd join up and possibly contribute (pay back the community for all the info i've gleaned over the years). I have 10 acres of desert land (sagebrush) which I will start building on this year (2025).

Hi ChrisO83. I also have a B2782B Snowblower. I removed the PTO shield and can't get it back together because I can't get that metal snap ring back into place.

How did you manage to get the snap ring back where it belongs?

Thanks for any help.

Tim

ignition wire diagram for L4400D

thank you, eric

Still listed as "NEW" although i'm on my tenth Kubota and have been a member for many years!

BX1800 lights died. Fuse & switch are okay. NO POWER FEEDING INTO SWITCH. Where should I check next?

New member here. Aiken SC & Lincolnton Ga. L4802HST

LX3520 HSDC