New profile posts

What's new New posts New media New media comments New profile posts Latest activity
D
Hi, Lugbolt said you do a lot of instrument cluster repairs. I have a 2004 GMC and it had a remanufactured unit in it when I bought it used over2 years ago and have replaced it twice. Do you hire out?
SCP
Hello all, new member as of 15 Feb 2025, new tractor owner (M62), lurked around on this site for years, figured i'd join up and possibly contribute (pay back the community for all the info i've gleaned over the years). I have 10 acres of desert land (sagebrush) which I will start building on this year (2025).
T
Hi ChrisO83. I also have a B2782B Snowblower. I removed the PTO shield and can't get it back together because I can't get that metal snap ring back into place.

How did you manage to get the snap ring back where it belongs?

Thanks for any help.

Tim
GlueGuy
Still listed as "NEW" although i'm on my tenth Kubota and have been a member for many years!
M
BX1800 lights died. Fuse & switch are okay. NO POWER FEEDING INTO SWITCH. Where should I check next?
View previous comments…
M
Mike149
Hi Jim! I checked the fuse with ohmmeter & also tried a new fuse. I checked the switch with ohmmeter, and also tried bypassing it with a “cheater” jumper wire, but still no lights. I will now follow your suggestion & trace wiring from the fuse block to the switch. Thanks!
M
Mike149
No, it’s been too cold here in Ohio!
  • Like
Reactions: 1 user
JimDeL
JimDeL
I know what you mean. I'm over in Austintown, North and East of you. Low temps and Lake Effect snow! What's not to like... :ROFLMAO:
P
Wanted to respond to a question you had about my 3rd gen bucket if you're still curious. The 3rd Gen bucket added "High Dump" bracket to give it better dumping capabilities. The 2nd Gen was a complete redesign of 1st Gen to make it less expensive to build.
S
need help with my gr2100 snowblower
K
k countryman
Have a lx3310 with 51 "front mount snowblower. Deflector is actuating , but chute rotation doesn't regardless the position of toggle switch. Toggle located on lever in cab. Loosened hydraulic connections and no obstructions and can turn chute by hand. Fuses are good. Any suggestions.
A
I have a B2630 I purchased new in 2011 the receiver end of the seat belt quit holding the ratchet in place I can hear it snap in place but a nice tug and it pops right out.
I am looking fo a replacement receiver end.
Mountainman
Mountainman
Thank you for the inquiry but unfortunately i wouldn't have any b2630 parts or anything that new.
C
Find a snow blower for your B7800?
B
b12
Yes. I have a Frontier SB1164 rear mount snowblower.
S
Where can I find a cheaper alternator for my BX23S. I only see them for $350
S
Scott323
My tractor battery light came on and was reading 18volts. I think I need a new alternator
Top Bottom