New profile posts

Hey folks, I hope you are all well and enjoying freedom while we still have it.

I have a very simple need, and with over 40 years as a tech and electrical and electronic training and experience I am a little frustrated at my lack of success on achieving this simple task so far. So I'm crying for help.

I have a customer with several M5-111 tractors I need to place our device in. All I need is to connect with the PTO switch. I do not have much experience on the Orange tractors, but I understand they use ground switching instead of hot switching. I truly do not know.

Is there a 12 VDC signal I can tap that would be hot when the PTO is engaged? If I can just locate the correct PTO wiring,

Would anyone have a diagram, advice or both? I sure would appreciate it if you can help.

NEWT

Good afternoon kind sir, I am in search of a L285 s/n 10414 steering gearbox assembly or just the housing. I found you through the world wide web and hope you may be able to help. Thank and talk with you soon.

RCK60B discharge side spindle has nearly come apart quicker than a frog in a dynamite pond! Hopefully I can find a complete spindle replacement kit. Trying my luck at Agripower first then once they tell me what it costs I’ll know my options..or lack there of

Got the front tires of my L4600 in the creek, spun down in loose gravel trying to back out, engine died, pulled tractor out on high ground, drained oil from crank case, had maybe a cup to a pint of water in it as the water had been about an inch over the dip stick. water had got sucked into air filter, apparently that's what killed the engine? engine would not crank over with starter? assuming hydrolocked? it was a clear clean creek water, probably in the water 30 min. any suggestions?

Still got my 2004 B7510hst. Old girl still getting it done. Can’t beat a great design, great build quality and great dealer help.

I appreciate your response.

I looked at Generac. They have a good advertising budget and sell at all the box stores. Around here we have Lowes, Homedepot and Menards. Menards offers 11% in store credit for any purchase in the store. That's a nice credit since they all charge the exact same price. But I decided against them to go with Kohler.

The guy who has the Kohler will bring it to me, set it, let me find installers for wiring, trench, propane connection, and then he comes back and does start up. He installs in the county he located in but doesn't have permits/license in this county and apparently doesn't want to deal with them.

He quoted $6550 for the unit, plus carb heater $170, plus Interstate Battery $145, delivery, set generator, start up and registration $600 for a total of $7485 plus tax. All that seems reasonable to me. If I can stir up a licensed electrician I'm hoping to get that done for $2500 or less.

Do you still have the 70050-00540 bracket for sale?

Thanks!

B7100 HYDROSTATIC FORWARD/REVERSE INTERMITTENT ISSUE
I seem to run into an issue where I run the tractor for an extended time using a bushog or mid section mower and all of a sudden it I cannot drive it forward or reverse for perhaps 20 seconds or so. The PTO still works and is spinning and after the short wait it works just fine. Is the hydrostatic drive just overheating or is this another issue I need to concern myself with? This is an older (81) 4 wheel drive which has about 1400hrs logged and works fine otherwise (has a bucket as well).
Any help or info would be appreciated, thanks.

I’d like the sealed one for the $30. Give me guidance on how to send the $. I can Paypal to your email, snail mail a check, or ??
Ralph in NH 03837

I have a TG 1860 diesel, that I cannot get neutral. Good forward, then you have to hit the pedal down hard for reverse and it skids. You have to go back and forth several times to find neutral. Can't see an adjustment to allow an easy neutral. Any help would be appreciated, thanks, Bill

If you happen to read this, please reply with a link to the thread you found that talks about replacing the rear lift link. Specifically how you managed to insert the link through both sides of the frame and have all line up properly. I'm searching but must not be using the proper words. Thanks!
Craig
you can email me at craigz28@comcast.net

Wastewater Recycling System - Genex Utility

Waste water recycling can meet more than 20 per cent of the city’s daily requirements.''
Besides, it produces optimistic effects such as cleansed lakes, rivers and groundwater.

Services: Water Technology | Sewage Treatment Plant Manufacturer

CTMI, one of the leading Steam Turbine Manufacturers in India, situated in Hoskote, 25 kms from Bangalore, CTMI has, within a decade, rolled out a number of turbines up to 30 MW across a range of industries

Services: Steam Turbines

I have 1986 L345 DT w/loader. I was using an auger, the auger corkscrewed and the 3-point would not lift it. With the PTO still turning, I put the tractor in gear and attempted to slip the clutch to get the tractor to ease forward in an attempt to shake it loose. Instead, the bump killed the tractor with the auger buried. I pushed in the clutch and the starter would not engage at all. I also had a lot of difficulty getting the PTO to disengage, but it finally did. I used another tractor to pull the auger, towed the tractor to the shop and have been trying to get the starter to work ever since. I'm guessing there is a safety switch somewhere that I've somehow ticked off. There is a switch against the block, directly ahead of the brake pedal. It's spring loaded and has an adjustment but I can't find anything that would possible trip it.
I can jump the starter from the battery, but have not been able to get the starter switch to engage the starter since burying the auger.

Do u still have the mower deck for sale? THANKS

Hey cat did we or did we not have a listing of where people are from? I was thinking of a meet and greet maybe and was wondering who was from around SW Pa

Is Rotella 15-40 T4 alright to use in my BX2380/

Does anyone know the max slope angle for an m6060 pulling a rotary mower?

Hi, were you able to obtain a part number or manufacturer for the antiscalp bracket written in several posts for the Kabota deck ?

Joe

The bx 2200 and bx series tractors tend to run hot and are very sensitive to lack of air flow through the radiator. i have made one major change on my Kubota bx 2200 a after mart radiator for a Honda auto it has three rows of tubes and aluminum tanks top and bottom of the radiator. Rework of the an shroud is required I have a press brake for re bending of the shroud a big job. A new 5 blade fan is next. Please let me know if you have made any other improvements to the cooling system