transmission fluid capacity

[Murray Aiken]

just changed transmission fluid and filters on my LX2610. When I added the 15 litres of udt as listed in the manual I get a dipstick reading that is above the crosshatched area. Is it normal to get a high reading after a change? Should I trust the dipstick or the manual? Interested in your thoughts

 

[MapleLeafFarmer]

if you have owned the tractor since new and / or you can trust the dip stick is correct / oem..... I would then go with trusting dip stick.

its possible you did not due a complete fluid drain / maybe missed one of the dra9n bolts or tractor not flat?

 

[whitetiger]

Use the dipstick.
The listed capacity is for an empty unit, not an oil change.

 

[Trash Panda]

 

[North Idaho Wolfman]

Go by the dipstick!
You'll never get all the fluid out no matter which way you do it.
Since you've over filled it you need to drain off the overfill.

 

[Murray Aiken]

Thank you for all the info! I am going to drain fluid to dip stick level and appreciate your help.