SSV75 missfire only when warmed up

[Fat Tony]

I have a 2020 Kubota SSV75 2 speed skid steer- it has 77 hours on it and when I was using it during the last snow fall I noticed a loss of power and a rough running motor. After it sat over night the miss fire was gone until the machine got warm again (normal operating temperature). I have heard that these fuel injectors fail when they warm up? If it is an injector I can install them - but I also read that the new injectors have a code that must be imputed into the machine other wise you will get poor performance? Is this true? Is there a scanner that I can buy to program if needed for this machine? What has everybody else done? Any help would be great. Thanks..Tony

 

[North Idaho Wolfman]

I have a 2020 Kubota SSV75 2 speed skid steer- it has 77 hours on it and when I was using it during the last snow fall I noticed a loss of power and a rough running motor. After it sat over night the miss fire was gone until the machine got warm again (normal operating temperature). I have heard that these fuel injectors fail when they warm up? If it is an injector I can install them - but I also read that the new injectors have a code that must be imputed into the machine other wise you will get poor performance? Is this true? Is there a scanner that I can buy to program if needed for this machine? What has everybody else done? Any help would be great. Thanks..Tony

You need a dealer to program it.
The dealer can also read it and tell if that is really the issue, instead of guessing.
The computer and software to read and program it is costly and requires certification classes.

 

[edritchey]

I only had 160 or so hours on mine and it started doing the same thing the dealer installed new injectors and a software update and it’s been fine ever since.