Rear axle oil seal

Butch

Active member

Equipment
Kubota 2410, RC60-24B, FL1000- kubota hydrolic front snow blade- plug aerator
Sep 10, 2009
681
155
43
75
Rising Sun, MD
Guys... for some reason the right rear oil seal popped out and obviously I lost my hydraulic oil... what can cause the seals out... Need answers parts shop tomorrow..
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
33,553
8,804
113
Sandpoint, ID
Bad install on the seal or maybe a plugged vent could build case pressure.
 

lakebota

New member
Sep 23, 2013
79
0
0
nor cal
Also possible, if previously replaced, grease was used on the bore. If it's the same as mine the manual says no grease.
Any chance the axle is bent?
 

Butch

Active member

Equipment
Kubota 2410, RC60-24B, FL1000- kubota hydrolic front snow blade- plug aerator
Sep 10, 2009
681
155
43
75
Rising Sun, MD
Wolfman... would you happen to know where the tranny case vent is?
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
33,553
8,804
113
Sandpoint, ID
It will be under the seat on the right side, it will have a question mark looking hose on it.