I took the blades off of my RCK54 deck to sharpen them. Each one has 2 conical washers and one hex ID washer. To me it seems like that's 1 more conical washer than there should be. On 2 of the blades they were stacked and oriented like they should be with a single washer. On the other one they were facing, keeping the bolt tight for quite a few threads. What is correct?
RCK 54 deck
- Thread starter bucktail
- Start date
JimDeL
Well-known member
Lifetime Member
Equipment
BX2380; R4 tires; 54" MMM; FEL w Pirahna bar; Ballast Box; BXpanded skid plate.
Stacked and oriented like they should be with a single washer is the proper way.
Do you have the WSM for the deck?
Btw, I use anti-seize compound on the bolts when replacing the blades, and torque them to 80 lb/ft.
Do you have the WSM for the deck?
Btw, I use anti-seize compound on the bolts when replacing the blades, and torque them to 80 lb/ft.
Thanks Jim. No I don't have a manual. Kubotabooks seems more difficult to navigate than it did when bought my L1500 and none of the YouTube videos I found showed it.