POWER STEERING INTERMITENT....

KUBOTAPOWER

New member

Equipment
M8200 NARROW, CAB & ZUIDBERG FRONT LINK WITH FRONT PTO
Oct 28, 2016
8
0
1
Canada,Quebec,Lanaudiere
Hello...I have a B2650 , 2017 with 100hrs... and my Power Steering is goinging ON and OFF ( hard to turn intermitent ) even if my Loader is empty or full ...up or down...My Hydraulic is Full....No visible leaks...nor loud weird noises.....My HST , Loader and 3 pts working great.....Anybody already had that problem..? or have a solution...? i only got the Tractor since few weeks....bought used....but almost new. Thank You....
 

Roadworthy

Well-known member
Lifetime Member

Equipment
L2501 HST
Aug 17, 2019
1,647
526
113
Benton City, WA
This is not a fix suggestion but you may have some warranty remaining. You could check with the dealer on that. I believe the remaining warranty goes with the tractor to the new owner.
 

Dave_eng

Well-known member
Lifetime Member

Equipment
M7040, Nuffield 465
Oct 6, 2012
5,251
1,030
113
Williamstown Ontario Canada
Suggest you check fluid levels and do the bleeding procedure on the pages below.

forum B2650 steering troubleshooting.jpg


forum B2650 steering relief valve.jpg

If fluid levels are OK and you have done the simple bleeding procedure, I am with Roadworthy on you getting the dealer involved..

Do not use the material I provided to start doing tests. With 100 hrs of service, the likelihood of an Owner finding the cause of this problem is low.

Dave
 
  • Like
Reactions: 1 users

kubotafreak

Well-known member

Equipment
GRAND l6060, L3560, B6100, gr2100, tg 1860, g1800, g1900, g2160
Sep 20, 2018
1,050
394
83
Arkansas, US
My guess would be air ingestion from the hyd suction filter to pump. Look for any wet areas, specifically around the filter, and the hose behind the hydraulic pump. The filter gets changed inside 100 hours...
 
  • Like
Reactions: 1 user